DriverZone.com: The place to find device driver updates.

ET4000 Windows 3.1 Video Driver Installation Instructions


This driver disk is designed to allow you to select or change the
video driver for Windows 3.1 using Windows Setup. Setup can be
executed from within Windows, or from DOS. Note that these driver
files are in Microsoft compressed format and can only be accessed and
executed by installing through Windows Setup. Simply copying the files
into your \Windows\System subdirectory WILL NOT work and may corrupt
your Windows installation. Installing the drivers correctly is,
however, a simple process. It is accomplished by following these
instructions:


Installation from floppy disk

1) Insert your Driver Disk in the appropriate floppy drive.

2) From your Windows directory, type SETUP and select DISPLAY to
change the video driver. Or, with Windows running, select Setup from
the Program Manager Main group. Refer to your Microsoft Windows User's
Guide for assistance in running Setup from inside Windows.

3) Select "Other disk..." to direct the program to the floppy disk
holding the new drivers. Note that after the drivers are installed,
you will not have to select "Other disk..." again should you decide to
change resolutions. Look for the ET4000-based drivers in the Display
selection menu to select the display resolution you want.

4) When asked where the drivers will be found, state the following:

A:\

Following instructions 6-7 below.


Installation from Hard Disk

1) Having the drivers loaded on the hard disk will make it easier and
faster to change resolutions in the future. Make a subdirectory to
hold the driver files.

example: C:>md \et4drv

and switch to that subdirectory (C:>cd \et4drv)

2) Insert the drivers disk into the appropriate drive and type the
following command:

COPY A:\*.*

3) From your Windows directory, type SETUP and select DISPLAY to
change the video driver. Or, with Windows running, select Setup from
the Program Manager Main group. Refer to your Microsoft Windows User's
Guide for assistance in running Setup from inside Windows.

4) Select "Other disk..." to direct the program to the subdirectory
holding the new drivers. Note that once the drivers are installed, you
should not have to select "Other" again should you decide to change
resolutions. Look for the ET4000-based drivers in the Display
selection menu to select the display resolution you want.

5) When asked where the drivers will be found, state the following
(deleting what the program has displayed in the input window):

[drive:]\[directory]

e.g.: C:>\et4drv

6) A standard Windows selection menu will appear with additional video
drivers from which to select.

7) Proceed normally through the remainder of the process. Check
Microsoft Windows installation procedures if necessary.

8) If you are having problems installing these drivers please contact your
board vendor for further assistance.(as your vendor may have done proprietary
enhancements that require custom drivers)

** IMPORTANT **

HiColor Driver (32768 and 65535-color driver)

This driver release includes Tseng HiColor drivers for 32768 and 65535
simultaneous colors. A HiColor comapatible DAC is required.


TrueColor Driver (16.7 million-color driver)

The 640x480 16.7 million-color driver requires 1mb of display memory to be
installed on your video board and a TrueColor DAC.


If your select a driver which your board can not support a brief message
will appear in the upper left of your screen

"video driver unable to set desired mode"

before returning you back to the DOS prompt. If this occurs simply, run the
SETUP program again and choose a supported display mode.

	Filename	Size	Readme	O.S.	Description
	bocasx31.zip	985KB	bocasx31.htm		Windows 3.1 SXVGA drivers for Tseng 4000 chipset
	et3-w31.zip	243KB	et3-w31.htm		Tseng ET3000 Windows 3.1 Drivers
	et3000.zip	169KB	et3000.htm		Tseng ET3000 Windows 3.0 Drivers
	et4-w31.zip	987KB	et4-w31.htm		Tseng ET4000 Windows 3.1 drivers
	et4-w32p.zip	608KB	et4-w32p.htm		Tseng W32p Windows 3.1 driver
	et4000.zip	1064KB	et4000.htm		Tseng ET4000 Windows drivers
	et4cview.zip	1069KB	et4cview.htm		Tseng ET4000 Colorview Windows 3.1 video drivers
	et4kw32.zip	590KB	et4kw32.htm		Tseng ET4000 / W32 / W32i / W32p Windows 3.1 drivers
	et4k_w31.zip	1066KB	et4k_w31.htm		Tseng ET4000 Windows 3.1 drivers
	et4mode.zip	45KB			Tsneg ET4000screen mode driver
	et4wn32.zip	590KB	et4wn32.htm		Tseng ET4000 / W32 / W32i / W32p Windows 3.1 drivers
	newtseng.zip	253KB	newtseng.htm		Tseng Powergraph - Windows 3.0 Display Drivers
	nt40tli.zip	63KB	nt40tli.htm		Windows NT 4.0 driver for the following Tseng chipsets: ET6000 ET4000/w32p ET4000/w32i ET4000/w32 ET4000
	set4000.zip	11KB			Tseng Screen mode utility for ET4000 chipsets
	setbus.zip	11KB	setbus.htm		Set AT bus data width for Tseng based svga cards to either 8 or 16 operation
	t3600256.zip	47KB	t3600256.htm		This is a Windows3 driver for Tseng ET-3000 based boards with 512KB video memory in 800x600x256 mode.
	vmode6.zip	9KB			Tseng set video mode utility
	w31et4.zip	543KB	w31et4.htm		ET4000 Windows 3.1 Video Driver disk
	w31et6.zip	640KB			Jazz Multimedia GF Extreme v4.0 drivers (Windows 3.x)
	w31w32.zip	624KB	w31w32.htm		Tseng ET4000 / W32 / W32i / W32p Windows 3.1 Video Driver disk
	w31w32au.zip	591KB	w31w32au.htm		Tseng ET4000 / W32 / W32i / W32p Windows 3.1drivers
	w31w32fe.zip	625KB	w31w32fe.htm		Tseng ET4000/W32/W32i/W32p Windows 3.1
	w32smli.zip	160KB	w32smli.htm		Tseng ET4000/W32/W32i/W32p OS/2 Drivers see readme
	w32wnt.zip	51KB	w32wnt.htm		Tseng Windows NT driver, This driver supports 640x480 to 1280x1024 resolutions in 256 color mode and 640x480 to 1024x768 in 64k color mode. see readme
	w95et6.zip	80KB			Tseng ET6000 windos 95 drivers
	w95w320.zip	19KB	w95w320.htm		Tseng W32 Family Display Driver for Windows 95
	wntw32.zip	66KB	wntw32.htm		Windows NT 3.1 ET4000 / W32 / W32i / W32p Driver