ColorView Windows 3.1 Video Driver Installation Instructions
This driver disk is designed to allow you to select or change the
video driver for Windows 3.1 using Windows Setup. Setup can be
executed from within Windows, or from DOS. Note that these driver
files are in Microsoft compressed format and can only be accessed and
executed by installing through Windows Setup. Simply copying the files
into your \Windows\System subdirectory WILL NOT work and may corrupt
your Windows installation. Installing the drivers correctly is,
however, a simple process. It is accomplished by following these
instructions:
Installation from floppy disk
1) Insert your Driver Disk in the appropriate floppy drive.
2) From your Windows directory, type SETUP and select DISPLAY to
change the video driver. Or, with Windows running, select Setup from
the Program Manager Main group. Refer to your Microsoft Windows User's
Guide for assistance in running Setup from inside Windows.
3) Select "Other disk..." to direct the program to the floppy disk
holding the new drivers. Note that after the drivers are installed,
you will not have to select "Other disk..." again should you decide to
change resolutions. Look for the ColorView-based drivers in the Display
selection menu to select the display resolution you want.
4) When asked where the drivers will be found, state the following:
C:\TCIAX\WIN31
Following instructions 5-6 below.
Installation from Hard Disk
1) Having the drivers loaded on the hard disk will make it easier and
faster to change resolutions in the future.
2) From your Windows directory, type SETUP and select DISPLAY to
change the video driver. Or, with Windows running, select Setup from
the Program Manager Main group. Refer to your Microsoft Windows User's
Guide for assistance in running Setup from inside Windows.
3) Select "Other disk..." to direct the program to the subdirectory
holding the new drivers. Note that once the drivers are installed, you
should not have to select "Other" again should you decide to change
resolutions. Look for the ColorView-based drivers in the Display
selection menu to select the display resolution you want.
4) When asked where the drivers will be found, state the following
(deleting what the program has displayed in the input window):
[drive:]\[directory]
e.g.: C:>\TCIAX\WIN31
5) A standard Windows selection menu will appear with additional video
drivers from which to select.
6) Proceed normally through the remainder of the process. Check
Microsoft Windows installation procedures if necessary.
7) If you are having problems installing these drivers please contact your
board vendor for further assistance.(as your vendor may have done proprietary
enhancements that require custom drivers)
** IMPORTANT **
The 800x600 and 1024x768 256-color Turbo drivers (ColorView ET4TURBO) require 1mb of
display memory to be installed on your video board.
Also, this release includes Tseng/Sierra HiColor drivers for 32768 and
65535 simultaneous colors. If your select a HiColor driver which your board
can not support a brief message will appear in the upper left of your screen
"video driver unable to set desired mode"
before returning you back to the DOS prompt. If this occurs simply, run the
SETUP program again and choose a supported display mode.
Filename | Size | Readme | O.S. | Description | |
bocasx31.zip | 985KB | bocasx31.htm | Windows 3.1 SXVGA drivers for Tseng 4000 chipset | ||
et3-w31.zip | 243KB | et3-w31.htm | Tseng ET3000 Windows 3.1 Drivers | ||
et3000.zip | 169KB | et3000.htm | Tseng ET3000 Windows 3.0 Drivers | ||
et4-w31.zip | 987KB | et4-w31.htm | Tseng ET4000 Windows 3.1 drivers | ||
et4-w32p.zip | 608KB | et4-w32p.htm | Tseng W32p Windows 3.1 driver | ||
et4000.zip | 1064KB | et4000.htm | Tseng ET4000 Windows drivers | ||
et4cview.zip | 1069KB | et4cview.htm | Tseng ET4000 Colorview Windows 3.1 video drivers | ||
et4kw32.zip | 590KB | et4kw32.htm | Tseng ET4000 / W32 / W32i / W32p Windows 3.1 drivers | ||
et4k_w31.zip | 1066KB | et4k_w31.htm | Tseng ET4000 Windows 3.1 drivers | ||
et4mode.zip | 45KB | Tsneg ET4000screen mode driver | |||
et4wn32.zip | 590KB | et4wn32.htm | Tseng ET4000 / W32 / W32i / W32p Windows 3.1 drivers | ||
newtseng.zip | 253KB | newtseng.htm | Tseng Powergraph - Windows 3.0 Display Drivers | ||
nt40tli.zip | 63KB | nt40tli.htm | Windows NT 4.0 driver for the following Tseng chipsets: ET6000 ET4000/w32p ET4000/w32i ET4000/w32 ET4000 |
||
set4000.zip | 11KB | Tseng Screen mode utility for ET4000 chipsets | |||
setbus.zip | 11KB | setbus.htm | Set AT bus data width for Tseng based svga cards to either 8 or 16 operation | ||
t3600256.zip | 47KB | t3600256.htm | This is a Windows3 driver for Tseng ET-3000 based boards with 512KB video memory in 800x600x256 mode. | ||
vmode6.zip | 9KB | Tseng set video mode utility | |||
w31et4.zip | 543KB | w31et4.htm | ET4000 Windows 3.1 Video Driver disk | ||
w31et6.zip | 640KB | Jazz Multimedia GF Extreme v4.0 drivers (Windows 3.x) | |||
w31w32.zip | 624KB | w31w32.htm | Tseng ET4000 / W32 / W32i / W32p Windows 3.1 Video Driver disk | ||
w31w32au.zip | 591KB | w31w32au.htm | Tseng ET4000 / W32 / W32i / W32p Windows 3.1drivers | ||
w31w32fe.zip | 625KB | w31w32fe.htm | Tseng ET4000/W32/W32i/W32p Windows 3.1 | ||
w32smli.zip | 160KB | w32smli.htm | Tseng ET4000/W32/W32i/W32p OS/2 Drivers see readme | ||
w32wnt.zip | 51KB | w32wnt.htm | Tseng Windows NT driver, This driver supports 640x480 to 1280x1024 resolutions in 256 color mode and 640x480 to 1024x768 in 64k color mode. see readme | ||
w95et6.zip | 80KB | Tseng ET6000 windos 95 drivers | |||
w95w320.zip | 19KB | w95w320.htm | Tseng W32 Family Display Driver for Windows 95 | ||
wntw32.zip | 66KB | wntw32.htm | Windows NT 3.1 ET4000 / W32 / W32i / W32p Driver |
style="display:inline-block;width:336px;height:280px"
data-ad-client="ca-pub-5193782351433030"
data-ad-slot="2063583586">