setbus : set AT bus data width for tseng based svga cards to
either 8 or 16 operation. Most useful for Windows developers using
two monitors for CodeView debugging. By default, if there is a monochrome
(or other second monitor on the AT bus, the svga card operates at only
8 bits doubling video time.
This program allows the user to tell the svga card to use 16-bit data paths
which doubles video perforamce. This improvement is nearly complete, as
verified by the PC Labs Windows Graphics benchmark test.
Some programs, such as pcANYWHERE IV and Microsoft's CV and CVW, will
only operate when the bus is in 8-bit mode.
Changing the mode within a DOS virtual session under Windows is not
sufficient to allow these programs to operate properly. SETBUS must
be executed before Windwos for these programs to function.
The source for this code was downloaded from the STB section of the
GRAHICSVENDOR forum on Compuserv. The original author is unknown.
This is offered as-is. No claims attached.
It has been tested with an Orchid Pro Designer II card, probably works with
STB's Tseng based cards, and may work with other Tseng cards.
Files in this .zip file:
setbus.c source code.
mkbus.bat creates setbus.com if you have the correct compiler
setbus.com executable downloaded from original STB file
setbus.exe executable created from MSC 6.0
readme.doc this file
The mkbus.bat file contains the commands needed to complie the program
with some (unknown to me) compiler. I simply used Microsoft C6.00a with the
command:
cl setbus
both the .com and .exe versions appear to work properly.
Uploaded by Pat Farrell, aka pfarrell@gmuvax2.gmu.edu on the Internet.
Filename | Size | Readme | O.S. | Description | |
bocasx31.zip | 985KB | bocasx31.htm | Windows 3.1 SXVGA drivers for Tseng 4000 chipset | ||
et3-w31.zip | 243KB | et3-w31.htm | Tseng ET3000 Windows 3.1 Drivers | ||
et3000.zip | 169KB | et3000.htm | Tseng ET3000 Windows 3.0 Drivers | ||
et4-w31.zip | 987KB | et4-w31.htm | Tseng ET4000 Windows 3.1 drivers | ||
et4-w32p.zip | 608KB | et4-w32p.htm | Tseng W32p Windows 3.1 driver | ||
et4000.zip | 1064KB | et4000.htm | Tseng ET4000 Windows drivers | ||
et4cview.zip | 1069KB | et4cview.htm | Tseng ET4000 Colorview Windows 3.1 video drivers | ||
et4kw32.zip | 590KB | et4kw32.htm | Tseng ET4000 / W32 / W32i / W32p Windows 3.1 drivers | ||
et4k_w31.zip | 1066KB | et4k_w31.htm | Tseng ET4000 Windows 3.1 drivers | ||
et4mode.zip | 45KB | Tsneg ET4000screen mode driver | |||
et4wn32.zip | 590KB | et4wn32.htm | Tseng ET4000 / W32 / W32i / W32p Windows 3.1 drivers | ||
newtseng.zip | 253KB | newtseng.htm | Tseng Powergraph - Windows 3.0 Display Drivers | ||
nt40tli.zip | 63KB | nt40tli.htm | Windows NT 4.0 driver for the following Tseng chipsets: ET6000 ET4000/w32p ET4000/w32i ET4000/w32 ET4000 |
||
set4000.zip | 11KB | Tseng Screen mode utility for ET4000 chipsets | |||
setbus.zip | 11KB | setbus.htm | Set AT bus data width for Tseng based svga cards to either 8 or 16 operation | ||
t3600256.zip | 47KB | t3600256.htm | This is a Windows3 driver for Tseng ET-3000 based boards with 512KB video memory in 800x600x256 mode. | ||
vmode6.zip | 9KB | Tseng set video mode utility | |||
w31et4.zip | 543KB | w31et4.htm | ET4000 Windows 3.1 Video Driver disk | ||
w31et6.zip | 640KB | Jazz Multimedia GF Extreme v4.0 drivers (Windows 3.x) | |||
w31w32.zip | 624KB | w31w32.htm | Tseng ET4000 / W32 / W32i / W32p Windows 3.1 Video Driver disk | ||
w31w32au.zip | 591KB | w31w32au.htm | Tseng ET4000 / W32 / W32i / W32p Windows 3.1drivers | ||
w31w32fe.zip | 625KB | w31w32fe.htm | Tseng ET4000/W32/W32i/W32p Windows 3.1 | ||
w32smli.zip | 160KB | w32smli.htm | Tseng ET4000/W32/W32i/W32p OS/2 Drivers see readme | ||
w32wnt.zip | 51KB | w32wnt.htm | Tseng Windows NT driver, This driver supports 640x480 to 1280x1024 resolutions in 256 color mode and 640x480 to 1024x768 in 64k color mode. see readme | ||
w95et6.zip | 80KB | Tseng ET6000 windos 95 drivers | |||
w95w320.zip | 19KB | w95w320.htm | Tseng W32 Family Display Driver for Windows 95 | ||
wntw32.zip | 66KB | wntw32.htm | Windows NT 3.1 ET4000 / W32 / W32i / W32p Driver |
style="display:inline-block;width:336px;height:280px"
data-ad-client="ca-pub-5193782351433030"
data-ad-slot="2063583586">