DriverZone.com: The place to find device driver updates.

TSENG ET3000 DRIVER INSTALLATION
FOR MICROSOFT WINDOWS 3.0


The instructions which follow are applicable to users of Microsoft Windows 3.0
and Tseng ET3000 VGA based adapters such as Samsung SVGA/16. Notec that, to use
800x600 and 1024x768 modes, an ANALOG color display capable of these high resolu-
tions is required.

The "Tseng ET3000 - Windows 3.0 Driver Disk" contains 256 color and high resolu-
tion drivers, as well as a file called SETUP.INF that replaces the files of the
same name on the Microsoft Windows 3.0 Setup "DISK 1" diskette. Follow the ins-
tructions listed below carefully to install the drivers.

Instructions:

1. Make a DISKCOPY of the Setup "Disk 1" diskette.
Example (for systems with a single floppy and hard drive):

C:>DISKCOPY A: A:

The system will use drive A: for both the original and the copy as the source
and target diskettes are inserted alternately for the copy.

2. After the copy is made, return the original to its jacket and store safely.

3. Copy the file SETUP.INF from the Tseng ET3000 - Windows 3.0 Driver Disk to the
newly-created copy of the Setup "Disk 1" diskette. Example (for systems with
a single floppy and hard drive):

C:>DISKCOPY A:SETUP.INF B:

The system will use drive A: as drive B: also. After the copy is finished,
type A: [ENTER].

4. Type SETUP [ENTER] to begin installation of Windows 3.0.

5. Review the configuration list when it is shown. If you wish to change Display
type, move the highlighted bar to the "Display:" line and press [ENTER] to
select from the available list.

6. The program will ask you to insert the Tseng ET3000 - Windows 3.0 Driver Disk
in order to install the drivers as required. After this is done, the install-
ation program will continue normally.

After you complete the above steps you can begin using Windows 3.0.

Note : If you wish to change the display type after completing the installation,
click on the Windows Setup icon found in the Main desktop window.



INSTRUCTIONS - FIRST TIME WINDOWS 3.0 INSTALLATION

Follow the instructions contained in the WIN30DRV.DOC file to install the Tseng
ET3000 display drivers.


INSTRUCTIONS - WINDOWS ET3000 ALREADY INSTALLED

To use the Tseng ET3000 Windows 3.0 drivers you need to copy the following files
into the \WINDOWS\SYSTEM subdirectory.

VGA364.DRV
VGA374.DRV
VGA348.DRV
VGAMONOX.GR2
VGACOLRX.GR2
VDDTLI3.386
SETUP.INF

If you have ALREADY installed Windows 3.0, you can copy the above list of files
into the \WINDOWS\SYSTEM subdirectory. After you copy the files, change the
display configuration from within Windows itself to one of the extended drivers.
See the Windows documentation for further information.

When you run the Windows Setuo to change to a different driver Windows may prompt
you for some of the Windows Installation diskettes. The drivers use display fonts
which are contained on the standard Windows 3.0 distribution diskettes.

The enclosed drivers are generic and should work with most ET3000 based boards.
The drivers have various display memory requirements and of course your display
monitor must be able to support the resolution you select.

The drivers support the following:

Resolution Mode Minimun display Driver name
(HEX) memory required

640x480 (2 colors) 11h 256KB VGAMONO.DRV **
640x480 (16 colors) 12h 256KB VGA.DRV **
800x600 (16 colors) 29h 256KB VGA364.DRV
1024x768 (16 colors) 37h 512KB VGA374.DRV
640x480 (256 colors) 2Eh 512KB VGA348.DRV

** uses Windows 3.0 supplied VGA driver


*** IMPORTANT ***

It is important that the drivers be installed properly, replacement grabbers (GR2
extension) and Virtual-Display-Device handler (386 extension) are included to
properly support the extension feature set of the ET3000 VGA chip.

	Filename	Size	Readme	O.S.	Description
	bocasx31.zip	985KB	bocasx31.htm		Windows 3.1 SXVGA drivers for Tseng 4000 chipset
	et3-w31.zip	243KB	et3-w31.htm		Tseng ET3000 Windows 3.1 Drivers
	et3000.zip	169KB	et3000.htm		Tseng ET3000 Windows 3.0 Drivers
	et4-w31.zip	987KB	et4-w31.htm		Tseng ET4000 Windows 3.1 drivers
	et4-w32p.zip	608KB	et4-w32p.htm		Tseng W32p Windows 3.1 driver
	et4000.zip	1064KB	et4000.htm		Tseng ET4000 Windows drivers
	et4cview.zip	1069KB	et4cview.htm		Tseng ET4000 Colorview Windows 3.1 video drivers
	et4kw32.zip	590KB	et4kw32.htm		Tseng ET4000 / W32 / W32i / W32p Windows 3.1 drivers
	et4k_w31.zip	1066KB	et4k_w31.htm		Tseng ET4000 Windows 3.1 drivers
	et4mode.zip	45KB			Tsneg ET4000screen mode driver
	et4wn32.zip	590KB	et4wn32.htm		Tseng ET4000 / W32 / W32i / W32p Windows 3.1 drivers
	newtseng.zip	253KB	newtseng.htm		Tseng Powergraph - Windows 3.0 Display Drivers
	nt40tli.zip	63KB	nt40tli.htm		Windows NT 4.0 driver for the following Tseng chipsets: ET6000 ET4000/w32p ET4000/w32i ET4000/w32 ET4000
	set4000.zip	11KB			Tseng Screen mode utility for ET4000 chipsets
	setbus.zip	11KB	setbus.htm		Set AT bus data width for Tseng based svga cards to either 8 or 16 operation
	t3600256.zip	47KB	t3600256.htm		This is a Windows3 driver for Tseng ET-3000 based boards with 512KB video memory in 800x600x256 mode.
	vmode6.zip	9KB			Tseng set video mode utility
	w31et4.zip	543KB	w31et4.htm		ET4000 Windows 3.1 Video Driver disk
	w31et6.zip	640KB			Jazz Multimedia GF Extreme v4.0 drivers (Windows 3.x)
	w31w32.zip	624KB	w31w32.htm		Tseng ET4000 / W32 / W32i / W32p Windows 3.1 Video Driver disk
	w31w32au.zip	591KB	w31w32au.htm		Tseng ET4000 / W32 / W32i / W32p Windows 3.1drivers
	w31w32fe.zip	625KB	w31w32fe.htm		Tseng ET4000/W32/W32i/W32p Windows 3.1
	w32smli.zip	160KB	w32smli.htm		Tseng ET4000/W32/W32i/W32p OS/2 Drivers see readme
	w32wnt.zip	51KB	w32wnt.htm		Tseng Windows NT driver, This driver supports 640x480 to 1280x1024 resolutions in 256 color mode and 640x480 to 1024x768 in 64k color mode. see readme
	w95et6.zip	80KB			Tseng ET6000 windos 95 drivers
	w95w320.zip	19KB	w95w320.htm		Tseng W32 Family Display Driver for Windows 95
	wntw32.zip	66KB	wntw32.htm		Windows NT 3.1 ET4000 / W32 / W32i / W32p Driver