DriverZone.com: The place to find device driver updates.

DS-XG Driver Installation for Win NT:

Please note that the driver you are about to install was designed to function with the
YMF724 and YMF740, also called DS-XG, which was soldered down on the motherboard.
If this is your case, please skip to the General Information section.

If you are installing this driver on an add-on card, you need to make sure that there are
no other sound chip on the motherboard of your computer. If there is another sound
chip on the mother board, then you will have to disable that sound chip through the
BIOS because it will interfere with this driver. The manufacturer of your PC system
should be able to give you instructions to change settings in the BIOS.
YAMAHA CANNOT advise you on this procedure.

General Information:

Prior to installing the driver for the DS-XG, you should have already created a folder in
your hard disk drive and downloaded the executable file in that new folder as instructed
by our web page. If not, we highly recommend that you follow all the steps for downloading.
Please note that Windows will be restarted so we highly recommend that you exit out of
any applications that you may have opened and save any files before going forward.
It is a good practice to back-up your files before any installation.

For the Advance User:

1) Go to the folder, in your hard disk drive, where you downloaded the executable file.
2) Double click on "Setup.exe"and follow all Pop Up window instructions.

Detailed step-by-step instructions:

1) From the Task Bar click on "Start".
2) Move up to "Programs".
3) Slide over then down and click on "Windows NT Explorer".
4) Locate and click on the folder you created that has the driver file you downloaded.
5) Locate and double click on the folder "Disk1".
6) Locate and double click on the executable file "Setup.exe".
7) At the DS-XG Win NT Setup Window, read the entire text then click on the "Next"
button.
8) At the Yamaha DS-XG Audio Driver Window click on the "OK" button.
NOTE: Do not attempt to change any DMA/IRQ settings; Changing the default
DMA/IRQ could cause severe problems in your computer. If you choose to do so,
it will be at your own risk. Our Technical Staff will NOT BE ABLE TO HELP YOU
after you choose to do so.
9) At the Yamaha DS-XG Driver Window mark (usually a dot) in the space provided next
to "Yes, I want to restart my computer now", then click on the "Finish" button.

To Verify the Installation:

10) From the Task Bar click on "Start".
11) Move up to "Settings"
12) Slide over and click on "Control Panel".
13) At the Control Panel, locate and double click on the "Yamaha DS-XG Au..." icon.
14) If the last 4 digits of the version number matches the last 4 digits on the file you
donwloaded, then the driver was successfully installed. Congratulations....

DISCLAIMER INFORMATION:

NOTE: The driver(s) MAY NOT BE APPROVED by the manufacturer of your sound card
or PC system, and that they MAY NOT WORK with your specific sound card or PC
system configuration. Use of these driver(s) should be done at the risk of the users
and we cannot be held responsible for anything caused by using them.

	Filename	Size	Readme	O.S.	Description
	31v2329.exe	1751KB	31v2329.htm		YAMAHA OPL3-Sax drivers update for Windows 3.1 These are reference drivers, if possible get the drivers from you OEM vendor, if you are unsure who made you card, you can look them up using the FCC Search
	95v1026.exe	5578KB	95v1026.htm		Yamaha Windows 95 /98 drivers for the YMF724 / YMF740, also called DS-XG and the WAVEFORCE192 Sound card only SEE THE README BEFORE DOWNLOADING !!!
	95v2343.exe	1948KB	95v2343.htm		Yamaha OPL3-SAx Driver Installation for Win95/98. These are reference drivers, if possible get the drivers from you OEM vendor, if you are unsure who made you card, you can look them up using the FCC Search
	dsxgwin2k.exe	4750KB			Yamaha Windows 2000 drivers for the Waveforce DS-XG sound cards
	ntv2311.exe	138KB	ntv2311.htm		Yamaha OPL3-SAx Driver Installation for WinNT These are reference drivers, if possible get the drivers from you OEM vendor, if you are unsure who made you card, you can look them up using the FCC Search
	ntv6017.exe	3387KB	ntv6017.htm		Yamaha Windows NT driver for YMF724 and YMF740, also called DS-XG, which was soldered down on the motherboard.
	os2v304.exe	1948KB	os2v304.htm		Yamaha drivers for OS/2 supporting these models: OPL3-SA, OPL3-SA2, OPL3-SA3, OPL4-ML(Hardware Wavetable)
	setupdrv.zip	4232KB			Yamaha WaveForce 192 XG drivers for windows 95/98
	winnt.zip	2744KB			Yamaha WaveForce 192 XG drivers for Windows NT
	yamaha_dsxg_driver.exe	5955KB			Yamaha Windows 95 /98 DS-1x Drivers for YMF724, YMF740, YMF744, YMF754 These are reference drivers, if possible get the drivers from you OEM vendor, if you are unsure who made you card, you can look them up using the FCC Search
	yamaha_dsxg_nt_driver.exe	5608KB			Yamaha Windows NT 4.0 DS-1x Drivers for YMF724, YMF740, YMF744, YMF754 These are reference drivers, if possible get the drivers from you OEM vendor, if you are unsure who made you card, you can look them up using the FCC Search