DriverZone.com: The place to find device driver updates.

OPL3-SAx Driver Installation for Win95/98.

DISCLAIMER INFORMATION:

NOTE: The driver(s) MAY NOT BE APPROVED by the manufacturer of your sound card
or PC system, and that they MAY NOT WORK with your specific sound card or PC
system configuration. Use of these driver(s) should be done at the risk of the users
and we cannot be held responsible for anything caused by using them.

Prior to installing the driver for the OPL3-SAx, you should have already created a folder
in your hard disk drive and downloaded the executable file in that new folder as instructed
by our web page. If not, we highly recommend that you follow all the steps for downloading.

Please note that Windows will be restarted so we highly recommend that you exit out of
any applications that you may have opened and save any files before going forward.
It is a good practice to back-up your files before any installation.

If you are ready, let's begin.

For the Advance User:

1) Go to the folder, in your hard disk drive, where you downloaded the executable file.
2) Double click on "Setup.exe"and follow all Pop Up window instructions.

Detailed step-by-step instructions:

1) Go to the Task Bar and click on "Start"
2) Click on "Programs"
3) Click on "Windows Explorer"
4) Locate the folder where you downloaded the executable file and open it.
5) Double Click on the folder called "Disk 1"
6) Locate and double click on "Setup.exe." Setup.exe will restart your computer so
please make sure you exit all open application and save any files that you were
working on.
7) The "Welcome" box will appear. Read the entire message and follow the instruction.
9) Click "Next"
10) At the "Setup Complete" dialogue box, read the entire message. Click "Yes..."
on the Restart Windows. Click "Finish" for Windows to Restart the computer.

This will restart your computer. Windows will detect the hardware and automatically
install the new driver.

Verifying the Installation of the driver:

1) Click "Start" from the Task Bar
2) Click on "Settings"
3) Click on "Control Panel"
4) On the Control Panel Window, locate and double click on the "OPL3-SAx Config"
icon
5) On the OPL3-SAx Configuration Window, locate and click on the button called
"About..."
6) On the YAMAHA OPL3-SAx Configuration Window, read the version number.
If the last 4 digits of the version number match the executable file you downloaded,
then the mew driver was successfully installed.

	Filename	Size	Readme	O.S.	Description
	31v2329.exe	1751KB	31v2329.htm		YAMAHA OPL3-Sax drivers update for Windows 3.1 These are reference drivers, if possible get the drivers from you OEM vendor, if you are unsure who made you card, you can look them up using the FCC Search
	95v1026.exe	5578KB	95v1026.htm		Yamaha Windows 95 /98 drivers for the YMF724 / YMF740, also called DS-XG and the WAVEFORCE192 Sound card only SEE THE README BEFORE DOWNLOADING !!!
	95v2343.exe	1948KB	95v2343.htm		Yamaha OPL3-SAx Driver Installation for Win95/98. These are reference drivers, if possible get the drivers from you OEM vendor, if you are unsure who made you card, you can look them up using the FCC Search
	dsxgwin2k.exe	4750KB			Yamaha Windows 2000 drivers for the Waveforce DS-XG sound cards
	ntv2311.exe	138KB	ntv2311.htm		Yamaha OPL3-SAx Driver Installation for WinNT These are reference drivers, if possible get the drivers from you OEM vendor, if you are unsure who made you card, you can look them up using the FCC Search
	ntv6017.exe	3387KB	ntv6017.htm		Yamaha Windows NT driver for YMF724 and YMF740, also called DS-XG, which was soldered down on the motherboard.
	os2v304.exe	1948KB	os2v304.htm		Yamaha drivers for OS/2 supporting these models: OPL3-SA, OPL3-SA2, OPL3-SA3, OPL4-ML(Hardware Wavetable)
	setupdrv.zip	4232KB			Yamaha WaveForce 192 XG drivers for windows 95/98
	winnt.zip	2744KB			Yamaha WaveForce 192 XG drivers for Windows NT
	yamaha_dsxg_driver.exe	5955KB			Yamaha Windows 95 /98 DS-1x Drivers for YMF724, YMF740, YMF744, YMF754 These are reference drivers, if possible get the drivers from you OEM vendor, if you are unsure who made you card, you can look them up using the FCC Search
	yamaha_dsxg_nt_driver.exe	5608KB			Yamaha Windows NT 4.0 DS-1x Drivers for YMF724, YMF740, YMF744, YMF754 These are reference drivers, if possible get the drivers from you OEM vendor, if you are unsure who made you card, you can look them up using the FCC Search