DriverZone.com: The place to find device driver updates.

Windows NT ver. 3.5 & Windows NT ver. 3.51

Driver Name: TEAC4X.SYS
Version : BETA (not full tested)

Installing the CD55A driver into an already installed NT system.

1) Format a blank Hi Density diskette and name this disk
(volume label) "TEAC CD-ROM".

2) Copy the following files to the "TEAC CD-ROM" disk.

DISK 1
TEAC4X.SYS
TXTSETUP.OEM
OEMSETUP.INF
README.NOW (this read me file)

3) Boot NT from your computer system & log on.

a. From the "MAIN" group double click on the
WINDOWS NT SETUP icon.
b. Click on "OPTIONS" and select "ADD/REMOVE SCSI ADAPTERS".
c. From the list of available SCSI adapters scroll down to
"OTHER MANUFACTURE PROVIDE DISK".
d. Insert the diskette (volume lable "TEAC CD-ROM" into the
A: drive.
e. Click on "INSTALL". And allow the system to install the
TEAC4X.SYS driver and add it's information into the system
registry.
f. When complete close all windows and shut down.
g. Restart Windows NT. Your Super Quad 4X CD-ROM should now
be accessable.


To use the driver to install Windows NT from the CD-ROM disk, follow
the instructions in the Windows NT users guide.


If you have any questions or experience problems with the installation
or usage of the Super Quad 4X (CD55A) CD-ROM drive call (213)727-4860.

	Filename	Size	Readme	O.S.	Description
	cd55ant.zip	12KB	cd55ant.htm		This is the Windows NT 3.5x BETA driver for the Teac CD-55A 4x CD-ROM.
	cd55os2.zip	10KB	cd55os2.htm		This is the OS/2 2.1 and OS/2 WARP 3 drivers for the Teac CD-55A 4x CD-ROM that is attached to a Teac 8-bit I/F controller card only. Note: The file README.55A contains the I/O jumper settings for the Teac 8-bit I/F controller card.
	cd55_w3x.zip	295KB			This is the DOS and Windows 3.x driver for the Teac CD-55A 4x CD-ROM that is attached to a Teac 8-bit I/F controller card only.
	cd55_w95.zip	9KB	cd55_w95.htm		This is the Windows 95 driver for the Teac CD-55A 4x CD-ROM that is attached to a Teac 8-bit I/F controller card only.
	cd55__95.zip	11KB	cd55__95.htm		This is the Windows 95 driver for the Teac CD-55A 4x CD-ROM that is attached to either a Teac 8-bit or 16-bit I/F controller card.
	teac24x.zip	592KB	teac24x.htm		These are the DOS and Windows 3.1x/95 drivers for the Teac 24x CD-ROM.
	teac56e.zip	33KB	teac56e.htm		This is the ATAPI/DOS driver for the Teac CD-56E 6x IDE CD-ROM.
	teac58e.zip	475KB	teac58e.htm		This is the ATAPI/DOS driver for the Teac CD-58E 8x IDE CD-ROM.