DriverZone.com: The place to find device driver updates.

OPTi 82C928 MAD16 LATEST INFORMATION
DOS/Windows (Version 2.05)
07/19/94

1. SOFTWARE PACKAGE CONTENTS

The MAD16 software package contains (1) 3.5" 1.44M diskette.
. This is the DOS plus Windows installation diskette

The Installation diskette has the following subdirectories and files:

a.) Installation files
- INSTALL.EXE - Hard disk installation program
- INSTALL.001 - Compressed files
- INSTALL.DAT - Installation file
- DISK.ID - Disk Identifing file
- README.TXT - This file

b.) DOS Drivers & Files
- M16INIT.EXE - Program to test and configure the sound card
- SNDTEST.WAV - Wave audio file
- MAD16.CFG - Configuration file
- VOLTSR.EXE - Volume Memory Resident Program
- KARAOKE.EXE - Karaoke Program
- CDSETUP.SYS - CD-ROM setup device driver

c.) Windows Drivers & Files
- MAD16C.DRV - Base Audio Device Driver
- M16MIDI.DRV - External MIDI Device Driver
- VMAD16.386 - Virtual Device Driver
- MSMIXMGR.DLL - Microsoft Mixer Manager
- MIDIMAP.CFG - Configuration file for Midimapper

2. INSTALLATION PROCESS

The hard disk installation program, INSTALL.EXE, will copy the necessary
files from OPTi Installation disk into your hard disk. Follow the
following procedure to install the software:

(Assuming you are using floppy drive A, and you wish to install to hard
disk drive C)

1. Place the disk labeled "OPTi MAD16 Installation" in Drive A.

2. Type a: and press ENTER to change to Drive A.

3. Type install and press ENTER to begin the installation.

INSTALL.EXE will do the followings for you:

a.) Create the directory \MAD16 in your hard disk drive.

b.) Prompt you for CD-ROM and sound card options so that after you have
finished the installation and have rebooted your machine, you will
be ready to use the sound card.

c.) Copy the files in your floppy disk to the MAD16 directory and
Windows directory respectively.

d.) Update your CONFIG.SYS, AUTOEXEC.BAT and SYSTEM.INI files
In CONFIG.SYS, the following will be added:

- DEVICE=C:\MAD16\CDSETUP.SYS /T:S /P:340 (assuming SONY CD-ROM)

In AUTOEXEC.BAT:

- PATH=C:\MAD16 (appended)
SET MAD16=C:\MAD16
C:\MAD16\M16INIT /B
SET BLASTER=A220 I5 D1 T4

In SYSTEM.INI:

- [drivers]
WAVE=MAD16C.DRV
AUX=MAD16C.DRV
MIDI=MAD16C.DRV
MIXER=MAD16C.DRV
MIDI1=M16MIDI.DRV

[386Enh]
DEVICE=VMAD16.386

MAD16C.DRV is the Base driver comprising WAVE, MIDI, MIXER and AUXILIARY
audio services.

M16MIDI.DRV is the external MIDI driver which requires a keyboard attached
to the MIDI port.

VMAD16.386 is the Virtual Device driver for Windows Enhanced Mode.

e.) Depending if Sound Impression application if included in this
diskette, INSTALL.EXE will prompt you if you would like it to
install Sound Impression now. If YES, then INSTALL.EXE will launch
Windows and install the application for you.


3. GETTING HELP ABOUT M16INIT.EXE

You can issue the following command to get information about m16init.exe:

- M16init /?


4. VOLUME CONTROL TSR PROGRAM

The volume control memory resident program, VOLTSR.EXE, allows you to change volume
using hot keys while you are in a DOS application. The hot keys are:

Ctrl-Alt-U Raises the volume
Ctrl-Alt-D Lowers the volume
Ctrl-Alt-M Mute

For example, pressing the CTRL, ALT, and U keys will raise the volume.

You need to load the TSR before you can use it. To load the TSR, type
VOLTSR at the DOS prompt.


5. KARAOKE PROGRAM

The Karaoke.exe program allows user to control the input volume of the
microphone on the fly with "HOT KEYS." Before using Karaoke, the
VOLTSR.EXE program must be successfully loaded and running.

To enable Karaoke Mode, type: "KARAOKE ON" at the DOS prompt.

To increase MIC input, use: Ctrl-Alt-PageUp
To decrease MIC input, use: Ctrl-Alt-PageDown

To disable Karaoke Mode, type: "KARAOKE OFF" at the DOS prompt.


6. CD-ROM Interface Setup Device Driver

The CD-ROM Setup Device Driver is called CDSETUP.SYS. This driver sets up
the interface of your CD-ROM to the MAD16 sound card. To use the driver,
insert the following line to your CONFIG.SYS file BEFORE the CD-ROM
device driver line that you are using:

DEVICE=[drive:]\[directory]\CDSETUP.SYS /T:[M/S/P/X] /P:[address] /I:[IRQ] /D:[DMA]

[drive] = drive where you have the driver installed
[directory] = directory where the driver is located
[M/S/P/X] = M stands for Mitsumi
S stands for SONY
P stands for PANASONIC
X stands for disabled

[address] = Port address for CD-ROM (320, 330, 340, 360)

[IRQ] = Interrupt number (5,7,9,10,11)

[DMA] = DMA channel (0, 1, 3)

For example, the following line sets up the interface for a Mitsumi
CD-ROM:

DEVICE=C:\MAD16\CDSETUP.SYS /T:M /P:340 /I:10

If you did not specify the /I or /D options, CDSETUP will automatically
choose the default setting for the CD-ROM type your have specified.

- For Mitsumi, the IRQ is 10 and DMA is disabled.
- For SONY, they are both disabled.
- FOR PANASONIC, they are both disabled.

	Filename	Size	Readme	O.S.	Description
	233win95.zip	80KB			These are the DOS and Windows 95 drivers and utilities for the Shuttle HOT-233 sound card, which is based on the OPTi 82C929 chip.
	235win95.zip	619KB	235win95.htm		These are the DOS and Windows 95 drivers and utilities for the Shuttle HOT-235 sound card, which is based on the OPTi 82C930 chip.
	239win95.zip	660KB	239win95.htm		These are the DOS and Windows 95 drivers and utilities for the Shuttle HOT-239 sound card, which is based on the OPTi 82C930 chip.
	ss48_w31.zip	123KB	ss48_w31.htm		These are the DOS and Windows 3.1x drivers and utilities for the Shuttle Sound SS48 sound card, which is based on the OPTi 82C928 (MAD16) chip.