DriverZone.com: The place to find device driver updates.

Local Area Network Software Driver Support
for PMX PCMCIA ethernet adapter


< I > To configure this adapter and install software, please type:

INSTALL

and follow the on-screen instructions.


For more information, see your Installation Manual.

< II > Software Installation Advisory

1. For those who installed EMM386.EXE in your CONFIG.SYS, please
exclude memory address D000-D7FF from your system. Ethernet
PCMCIA Card will use this space to read Ethernet ID and other
information from the on-board flash ROM.

Example : DEVICE=EMM386.EXE NOEMS X=D000-D7FF

2. For those who installed Card and Socket Services device drivers
in your CONFIG.SYS, please run NETOPEN.EXE after those device
drivers since NETOPEN.EXE is a Card Services Client and should
only be activated after the Card and Socket Services drivers
are activated.

Example 1:(DataBook CardTalk)
DEVICE=C:\CARDTALK\SS_2.SYS (Socket Service driver)
DEVICE=C:\CARDTALK\CTALKCS.EXE (Card Service driver)
DEVICE=C:\CARDTALK\CARDTALK.SYS (Super Client driver)
DEVICE=C:\NETWORK\NETOPEN.EXE /PORT=300 /INT=5

Example 2:(SystemSoft CardSoft)
DEVICE=C:\CARDSOFT\SS365SL.EXE (Socket Service driver)
DEVICE=C:\CARDSOFT\CS.EXE (Card Service driver)
DEVICE=C:\CARDSOFT\CSALLOC.EXE C:\CARDSOFT\CSALLOC.INI
DEVICE=C:\CARDSOFT\CARDID.EXE
DEVICE=C:\NETWORK\NETOPEN.EXE /PORT=300 /INT=5

Example 3:(Phoenix PCMPlus)
DEVICE=C:\PCM3\CNFIGNAM.EXE /DEFAULT
DEVICE=C:\PCM3\PCMSS.EXE (Socket Services driver)
DEVICE=C:\PCM3\PCMCS.EXE (Card Service driver)
DEVICE=C:\PCM3\PCMRMAN.EXE
DEVICE=C:\PCM3\PCMSCD.EXE
DEVICE=C:\NETWORK\NETOPEN.EXE /PORT=300 /INT=5


< III > For the PMX card work properly, please follow the
instructions below :

1. Determine which Network OS the machine used.

2. Read the user's manual in the driver disk and modify some of

system information files, such as "AUTOEXEC.BAT", "CONFIG.SYS",

"PROTOCOL.INI", if necessary.

3. copy the proper network driver(s) from driver disk to the desired

directory.

	Filename	Size	Readme	O.S.	Description
	pe-200.zip	362KB	pe200.htm		PMX PCMCIA ethernet adapter driver