DriverZone.com: The place to find device driver updates.
Drivers
*****************************************************
* for ATAPI CD-ROM drive *
*****************************************************
/////////////////////////////////////////////////////
/// ///
/// Manual for using installer (DOS, OS/2) ///
/// ///
/// Making date: 11/23/95 ///
/// ///
/// Copyright (C) 1995 by MKE(Panasonic) ///
/// (Matsushita Kotobuki Electronics Co,.LTD) ///
/// All rights reserved. ///
/// Documentation by Device Driver Project(DDP) ///
/// ///
/////////////////////////////////////////////////////
*******************************************************************************
(A) PC-DOS and MS-DOS installtion Procedure
(also supported for Windows 3.1 / Windows For Workgroup 3.11)
*******************************************************************************
1. Supportted CD-ROM drive:
CR-572-B (double speed, tray loading type)
CR-574-B (quadruple speed, tray loading type)
CR-581-x (quadruple speed, tray loading type)
CR-583-x (octuple speed, tray loading type)
2. Installer file name:
INSTALL.EXE (Version 1.10, common file for installation)
INSTALL.DAT (installation's data file for ATAPI CD-ROM)
3. Discription for execution:
Please type following from the DOS prompt:
'A:'[return] or 'B:'[return]
'INSTALL' [return]
*******************************************************************************
(B) OS/2 2.1, 2.11, and Warp 3.0 installtion Procedure
*******************************************************************************
1. Supportted CD-ROM drive:
CR-572-B (double speed, tray loading type)
CR-574-B (quadruple speed, tray loading type)
CR-581-x (quadruple speed, tray loading type)
CR-583-x (octuple speed, tray loading type)
2. Installer file name:
INSTOS2.EXE (Version 2.10, common file for installation)
INSTOS2.DAT (installation's data file for ATAPI CD-ROM)
3. Discription for execution:
Please type following from the DOS prompt:
'A:'[return] or 'B:'[return]
'INSTOS2' [return]
Trademarks and Copyrights:
PC-DOS is a trademarks of International Business Machines Corporation.
MS-DOS is a trademark of Microsoft corporation.
OS/2 is a trademarks of International Business Machines Corporation.
Windows 3.1 is a trademark of Microsoft corporation.
Sound Blaster is a trademark of Creative Labs, Inc.
/////////////////////////////////////////////////////
/// ///
///Device Driver supportted STATUS in CD-ROM drive///
/// ///
/// Making date: 11/23/95 ///
/// ///
/// Copyright (C) 1995 by MKE(Panasonic) ///
/// (Matsushita Kotobuki Electronics Co,.LTD) ///
/// All rights reserved. ///
/// Documentation by Device Driver Project(DDP) ///
/// ///
/////////////////////////////////////////////////////
*******************************************************************************
(C) PC-DOS and MS-DOS device driver support
(also supported for Windows 3.1 / Windows For Workgroup3.11)
*******************************************************************************
1. Supportted CD-ROM drive:
CR-572-B (double speed, tray loading type)
CR-574-B (quadruple speed, tray loading type)
CR-581-x (quadruple speed, tray loading type)
CR-583-x (octuple speed, tray loading type)
2. Device Driver name:
CR_ATAPI.SYS (Version 5.17v) for DOS
WDCTRL.386 (Version 1.10 ) for 32bitDiskAccess=ON in Windows3.1
!!! CAUTION !!!
You can not use WDCTRL.386, when you use 32bitFileAccess=ON in WFW3.11.
Please change 32bitFileAccess=ON to 32bitFileAccess=OFF.
3. Driver discription:
[/D:xxxxxxx] ---> Device name option
ex.)DEVICE=CR_ATAPI.SYS /D:MSCD000
*[/P:nnn] ---> ATAPI base I/O Port Address(hex) option
ex.)DEVICE=CR_ATAPI.SYS /D:MSCD000 /P:nnn
nnn==1F0, 170, 1E8 or 168
Primary connection: nnn==1F0
Secondary connection: nnn==170
Tertiary connection: nnn==1E8(Sound Blaster IDE)
Quaternary connection: nnn==168(Sound Blaster IDE)
*[/I:xx] ---> Interrupt number option(IRQ=10,11,12,14,15)
ex.)DEVICE=CR_ATAPI.SYS /D:MSCD000 /I:xx
Primary connection: xx==14,10,11,12 or 15
Secondary connection: xx==15,10,11,12 or 14
Tertiary connection: xx==10,11,12,14 or 15
Quaternary connection: xx==10,11,12,14 or 15
*[/W:n] ---> Waiting value option
When PC read data from CD-ROM drive, Driver insert waiting
value into read cycle one by one.
If you are using PC that are not supported IOCHRDY, please set
this value(waiting value).
ex.)DEVICE=CR_ATAPI.SYS /D:MSCD000 /W:n
n==0, 1, 2, ... 255
(For example 106usec/1 wait in 486DX2 66MHz)
*[/Q] ---> Non stop option
Non stop(no message bort,
ex.)DEVICE=CR_ATAPI.SYS /D:MSCD000 /Q
*[/E] ---> Available error correction
This option is available error correction for CD-G application.
(Player for not including error correction)
ex.)DEVICE=CR_ATAPI.SYS /D:MSCD000 /E
*[/B] ---> No reset to CD-ROM Drive at boot configration
This option make invalid that Device Driver reset to CD-ROM
drive at boot sequence(in CONFIG.SYS).
* : You can omit this option.
*******************************************************************************
(D) OS/2 2.1, 2.11, and Warp 3.0 device driver support
*******************************************************************************
1. Supportted CD-ROM drive:
CR-572-B (double speed, tray loading type)
CR-574-B (quadruple speed, tray loading type)
CR-581-x (quadruple speed, tray loading type)
CR-583-x (octuple speed, tray loading type)
2. Device Driver name:
MKEATAPI.ADD (Version 1.12)
3. Driver discription:
*[/V] ---> Verbose Mode option
Displays controller status and drive type during OS/2
initialization.
*[/A:n] ---> Adapter Number option
Adapter 0 has default parameters for the primary adapter.
Adapter 1 has default parameters for the secondary adapter.
*[/P:nnn] ---> ATAPI base I/O Port Address(hex) option
This parameter overrides the default base I/O port address for
the adapter indecated. The default I/O address for primary is
(1F0) and for seconday is (170).
If you will set this parameter, you should set /I: parameter.
*[/I:xx] ---> Interrupt number option
This parameter overrides the default IRQ Number for the adapter
indecated.The default IRQ level for primary is (14) and for
secondary is (15).If you will set this parameter, you should
set /P: parameter.
*[/NI] ---> No Interrupt Mode( Polling Mode ) option
When you use IDE HDD and ATAPI CD-ROM drive at the same adapter
(primary or secondary), the MKEATAPI.ADD driver is automatically
used this mode.
*[/IOR] ---> I/O Channel Ready Supported Mode option
For the adapter with I/O channel ready, the MKEATAPI.ADD driver
can designate the fastest read mode.
* : You can omit this option.
Samples:
; scan to primary and secondary adapter.
BASEDEV=MKEATAPI.ADD /V
; scan to secondary adapter with I/O channel ready.
BASEDEV=MKEATAPI.ADD /V /A:1 /IOR
; scan to another adapter(I/O address 1E8 IRQ 11) with I/O channel ready.
BASEDEV=MKEATAPI.ADD /V /P:1E8 /I:11 /IOR
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
CAUTION:
OS/2 Warp has ATAPI CD-ROM filter driver(IBMIDECD.FLT). If problems occur
using the IBMIDECD filter, you fix lines in your OS/2 CONFIG.SYS file has
to be edited as follows:
rem BASEDEV=IBMIDECD.FLT
At the end of the file, add the following statement
BASEDEV=MKEATAPI.ADD /V
and copy to root directory on the OS/2 system drive.
In this time, if the CR-ROM drive is attached as master to primary or
secondary, you should fix a line in your OS/2 CONFIG.SYS file has to be
edited as follows:
BASEDEV=IBM1S506.ADD /A:x /I
The /A parameter refers to the adapter number that the CD-ROM is attached
to.The /I parameter indicates that the IBM1S506 driver should not attempt
to initialize the adapter indicated.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Trademarks and Copyrights:
PC-DOS is a trademarks of International Business Machines Corporation.
MS-DOS is a trademark of Microsoft corporation.
OS/2 is a trademarks of International Business Machines Corporation.
Windows 3.1 is a trademark of Microsoft corporation.
Sound Blaster is a trademark of Creative Labs, Inc.
Filename
Size
Readme
O.S.
Description
2xcdrive.zip
90KB
These are the DOS and Windows 3.x drivers for the Panasonic KXL-D720 PCMCIA-SCSI 2x CD-ROM.
Note: The README.COM file contains very good technical information on this device.
To view: C:\>readme {Enter/Return} after unziping file
56xwin95.zip
42KB
These are the Windows 95 drivers for these Panasonic CD-ROMs:CR-521 / 522 / 523 / 562 / 563.
5xx-scsi.zip
83KB
These are the DOS and Windows 3.1x drivers for use with these Panasonic SCSI CD-ROM drives:
CR-503-x (double speed, tray loading type)
CR-504-x (quadruple speed, tray loading type
CR-533-x (double speed, caddy loading type)
br>That are attached to one of these SCSI controller cards:
Adaptec AHA-152x
Adaptec AHA-154x
FUTURE/DOMAIN TMC- 8XX
FUTURE/DOMAIN TMC-16XX
720pcm32.zip
96KB
These are the DOS and Windows 95 drivers for the Panasonic KXL-D720 PCMCIA-SCSI 2x CD-ROM.
720wintb.zip
46KB
These are the Windows NT 3.51 drivers for the Panasonic KXL-D720 PCMCIA-SCSI 2x CD-ROM.
740os2.zip
80KB
These are the OS/2 WARP drivers for the Panasonic KXL-D740 PCMCIA-SCSI 4x CD-ROM.
740setup.zip
95KB
These are the DOS and Windows 95 drivers for the Panasonic KXL-D740 PCMCIA-SCSI 4x CD-ROM.
740tp760.zip
94KB
These are the DOS and Windows 95/NT 3.51 drivers for the Panasonic KXL-D740 PCMCIA-SCSI 4x CD-ROM.
Note: These are an IBM ThinkPad 760E specific release!
740wint4.zip
28KB
These are the Windows NT 4.0 drivers for the Panasonic KXL-D740 PCMCIA-SCSI 4x CD-ROM.
cr572b.zip
97KB
cr572b.htm
This is the ATAPI/DOS driver for the following Panasonic (MKE) IDE CD-ROMs:
CR-572-B (double speed, tray loading type)
CR-574-B (quadruple speed, tray loading type)
CR-581-x (quadruple speed, tray loading type)
CR-583-x (octuple speed, tray loading type)
pan56x.zip
96KB
These are the DOS, Windows 3.xx, and OS/2 drivers for these Panasonic CD-ROMs: CR-521 / 522 / 523 / 562 / 563.
pan578x.zip
100KB
These are the ATAPI/DOS drivers for these Panasonic CD-ROMs: CR-572 / 574/ 581.
pan57x.zip
98KB
These are the DOS drivers for these Panasonic CD-ROMs: CR-571/572 / 574.
pan_585.zip
108KB
pan_585.htm
Drivers for many different models Please see readme for models
pan_nt3x.zip
39KB
These are the Windows NT 3.x drivers for the Panasonic CR-52x/CR-56x CD-ROM drives and the Creative Labs SoundBlaster (8 and 16-bit) CD-ROM drives.
sgcdv.zip
6KB
This is the DOS driver for the Panasonic CR-5xx CD-ROM drives when used with an Aztech sound card.
tp760os2.zip
42KB
These are the OS/2 WARP drivers for the Panasonic KXL-D740 PCMCIA-SCSI 4x CD-ROM.
Note: These are an IBM ThinkPad 760E specific release!
style="display:inline-block;width:336px;height:280px"
data-ad-client="ca-pub-5193782351433030"
data-ad-slot="2063583586">