DriverZone.com: The place to find device driver updates.

Reveal IDE CDROM Interface Card
P/N: 13-004-102

Software Installation:

Before you install the software for your new CDROM .

1. If you already have a CDROM line with the MSCDEXE.EXE in it and the new
CDROM will become the only CDROM in your system, please remove that
line and then install the software. Do the same in the CONFIG.SYS file.

2. If you are planning to use the CDROM with a secondary IDE Interface Card,
you should add another section to your existing CDROM line as follows:

For the Autoexec.Bat file:

C:\DOS\MESCDEX.EXE /D:MSCD000 /D:MSCD001

[The last parameter is to ensure that both CDROM's have different ID's.]




____ End of file _____

	Filename	Size	Readme	O.S.	Description
	mit112.zip	63KB			These are the DOS and Windows 3.1x drivers v1.12 for the Mitsumi CD-ROMs.
	mit12-10.zip	74KB	mit12-10.htm		These are the DOS and Windows 3.1x drivers for the Mitsumi 12x CD-ROM.
	mit121.zip	64KB			These are the DOS and Windows 3.1x drivers v1.21 for the Mitsumi CD-ROMs.
	mit166.zip	62KB			These are the DOS and Windows 3.1x drivers v1.66 for the Mitsumi CD-ROMs.
	mit8x.zip	178KB	mit8x.htm		These are the DOS and Windows 3.1x drivers for the Mitsumi 8x CD-ROM.
	mitcddrv.zip	66KB			These are the DOS and Windows 3.x drivers for the Mitsumi 1x CD-ROM.
	mitsu520.zip	56KB	mitsu520.htm		This is the DOS driver for the Mitsumi IDE CDR-520 cd-rom Aka Reveal IDE cd-rom P/N: 13-004-102.