Drivers

+-----------------------------------------------------+
| ICD1200/AT Support Software Version 1.0 Information |
+-----------------------------------------------------+

This document describes information of ICD1200/AT Support Software.
Prior to use the unit, be sure to read this information with the
User's guide.
+--------------------+
| About Installation |
+--------------------+

(1) This installar (INSTALL.EXE) changes CONFIG.SYS and AUTOEXEC.BAT
as follows and registrates a device driver (IMES_CD.SYS).

(CONFIG.SYS)
DEVICE = C:_IMES_CD.SYS /D:IMESCD01

(AUTOEXEC.BAT)
C:_MSCDEX.EXE /D:IMESCD01

Note: The device name /D:IMESCD01 in CONFIG.SYS and AUTOESEC.BAT
must be same.

(2) Install to PC-DOS and Windows 3.1
1.Activate PC-DOS
2.Insert the Option Diskette in the package into a drive A.
3.Key in A:INSTALL and execute.
4.Follow the instructions on the screen.

(3) Install to Windows 95
As in Windows 95 a deveice driver is installed as a base function,
this installer may not be installed specifically.
But with the device driver in Windows 95 does not support CD-I,
CD-G and DMA data transfer.
The device driver supllied with ICD1200/AT support CD-I, CD-G
and DMA.

How to install to Windows 95
----------------------------
1.Actuate PC in DOS mode of Windows 95.
-Click START
-Click EXIT FROM Windows
-Click RETURN TO MS-DOS MODE
2.Insert the Option Diskette in the package into a drive A.
3.Key in A:INSTALL and execute.
4.Follow the instructions on the screen.
5.Reset PC (key in ctrl+alt+delete at same time)
6.On the Windows screen
-Click START
-Click CONTROL PANEL
-Click SYSTEM
-Click PERFORMANCE
-Click FILESYSTEM
-Click TROUBLE SHOOTING
-Click DO NOT USE DISK DREIVE WITH 32BITS PROTECT MODE
-Click O.K
-Click CLOSE BUTTON (X mark)


Set the DMA data transfer
-------------------------
Add /BMO to DEVICE = C:_IMES_CD.SYS /D:IMESCD01
(Example) DEVICE = C:_IMES_CD.SYS /D:IMESCD01 /BMO

Note: Prior setting DMA, make sure your PC supports DMA. If you are not
sure, contact the PC supplier.

  Filename Size Readme O.S. Description
zip imes1200.zip 42KB imes1200.htm This is the ATAPI/DOS driver for the Mirai/Imes ICD-1200/AT IDE CD-ROM.

style="display:inline-block;width:336px;height:280px"
data-ad-client="ca-pub-5193782351433030"
data-ad-slot="2063583586">