DriverZone.com: The place to find device driver updates.

*****************************************************
** **
** HOPAX CD-ROM DEVICE DRIVER INSTALLATION GUIDE **
** **
** Dept. : Engineering Dept. **
** P/N : HO-808-Cx **
** Making Date : 10/19/96 **
** Modified Date : 5/8/97 **
** Written By : CHEN CHUN CHIEH **
** ( HOPAX ) **
*****************************************************


* INSTALL floppy disk contains the following files.

INSTALL.EXE : Install program Ver.5.0
README.DOC : Install operation
UM1101A.SYS : Device Driver


******************************************************************************
DOS / Windows3.1 / Windows For Workgroup 3.11 Environments
******************************************************************************

< Connect the CD-ROM drive to IDE/ATAPI Interface in PC. >

In DOS session, execute the supplied INSTALL program.

[1] Insert the supplied installation disk into drive A as a default.

[2] Type "A:" and press ENTER to set the current drive to drive A.

[3] Type "INSTALL" and press ENTER.

[4] Reboot your system after the installation completes successfully.

******************************************************************************
Windows95 Environments
******************************************************************************

< Connect the CD-ROM drive to IDE/ATAPI Interface in PC. >

[1] You do not need to execute the supplied INSTALL program.

[2] Connect the CD-ROM drive to your computer and stand up Windows 95 system.

[3] Configration and setup will be completed automatically using "Plug and
Play" function of Windows 95.

When you access the files from the CD-ROM drive under DOS session of
Windows 95 ,follow next step.

Execute the supplied INSTALL program.
Step[1] to [4] are same as "Windows3.1 Environment".

******************************************************************************
Windows-NT Environments
******************************************************************************

< Connect the CD-ROM drive to IDE/ATAPI Interface in PC. >

[1] You do not need to execute the supplied INSTALL program.

[2] Replacing or adding CD-ROM drive,set up as the following in
Windows-NT desktop.

[3] Click the icon of "control panel",and then click the device.
Device menuappears.

[4] Select "atapi" and click the "Startup@Boot".

******************************************************************************
OS/2 Warp Environments
******************************************************************************

< Connect the CD-ROM drive to IDE/ATAPI Interface in PC. >

[1] You do not need to execute the supplied INSTAL program.

[2] Replacing or adding CD-ROM drive,set up as the following in
OS/2 Warp desktop.

1. Click the icon of "OS/2 System".
2. Click the icon of "System setup".
3. Click the icon of "Selective Install"
4. The memu of "System Configuration" is appeared.
5. Click "CD-ROM Device Support".
6. Select "Non-listed IDE CD-ROM" and click "OK".
7. Click "OK" button.
8. "OS/2 Setup and Installation" menu appears.
9. Click "Install"button.
10. "Source directory"menu appears.
11. Click "Change"button.
12. Insert the follopy disk or CD-ROM supplied with OS/2 system to current
drive.
13. Click "Set"button.
14. CD-ROM device drive will be installed.
15. After installation,restart OS/2 System.

*****************************************************************************
Confirmation / Manual modification for device driver installalltion.
*****************************************************************************

< To install driver manually in CONFIG.SYS >

DEVICE = C:\HOCDROM\ATAPI.EXE /d:HO_CD01

< To install Microsoft MSCDEX.EXE via AUTOEXEC.BAT >

MSCDEX /d:HO_CD01

/d: Name of CD-ROM device driver.Must match the value specifies in
CONFIG.SYS

******************************************************************************
General Notes
******************************************************************************

1. If you run the installation program INSTALL.EXE, it will automatically
insert the necessary commands in the CONFIG.SYS and AUTOEXEC.BAT files.

2. You do not need manual setup because the device driver automatically
detects IRQ,PRIMARY/SECONDARY and the port address of which CD-ROM is
conneted.

3. This CD-ROM is designed according to the specificaation of IDE/ATAPI
interface. Be sure to connect the CD-ROM to IDE/ATAPI interface.
Otherwise, the installation may cause malfunction or trouble in your
system and/or the CD-ROM.

******************************************************************************

< Trademark>

* DOS/Windows3.1 is a registered trademark of Microsoft corporation.
* Windows 95 is registered trademark of Microsoft corporation.
* Windows For Workgroup is registered trademark of Microsoft corporation.
* Windows-NT is registered trademark of Microsoft corporation.
* MSCDEX and microsoft are a registered trademark of Microsoft Corporation.
* OS/2 Warp is registered trademark of IBM Corporation.

	Filename	Size	Readme	O.S.	Description
	hopax.exe	63KB	hopax.htm		Hopax cd-rom driver for DOS- Win 3.1