DriverZone.com: The place to find device driver updates.

Reveal IDE CDROM Interface Card
P/N: 13-004-102

Software Installation:

Before you install the software for your new CDROM .

1. If you already have a CDROM line with the MSCDEXE.EXE in it and the new
CDROM will become the only CDROM in your system, please remove that
line and then install the software. Do the same in the CONFIG.SYS file.

2. If you are planning to use the CDROM with a secondary IDE Interface Card,
you should add another section to your existing CDROM line as follows:

For the Autoexec.Bat file:

C:\DOS\MESCDEX.EXE /D:MSCD000 /D:MSCD001

[The last parameter is to ensure that both CDROM's have different ID's.]




____ End of file _____

	Filename	Size	Readme	O.S.	Description
	gcdr420b.zip	42KB	gcdr420b.htm		These are the DOS and Windows 3.1x drivers for the Goldstar GCD-R420B CD-ROM.
	gcdr520.zip	57KB	gcdr520.htm		These are the DOS and Windows 3.1x drivers for the Goldstar GCD-R520 CD-ROM. Note: This is also for the Reveal CD-ROM, P/N: 13-004-102.
	gscd2x.zip	11KB	gscd2x.htm		This is the OS/2 2.x driver for the Goldstar GCD-R420 2x CD-ROM. Note: The file README.GS contains technical information on this CD-ROM and the jumper settings of the Interface Card.
	gstaride.zip	119KB			This is the DOS and Windows 3.1x drivers for the Goldstar IDE CD-ROMs.