DriverZone.com: The place to find device driver updates.

Copyright (c) 1993 by ALWAYS TECHNOLOGY CORP.
All rights reserved.

The AL-6X00 Installation Guide details the installation and
configuration of the AL-6X00 series high performance 32 bit
EISA SCSI adapter. The basic steps are:

1. Install SIMMs (1 OR 4 MByte, 70 ns or faster) in the SIMM
sockets of the AL-6200, starting with bank 1. SIMMs
must be all of the same capacity and installed in groups
of 4. No SIMMs (i.e. 0 MByte) is okay.

2. Install AL-6X00, with ribbon cables attached, in an EISA
slot as close to the motherboard microprocessor as possible.

3. Run the ALUTIL program on this diskette if you wish to low
-level format your hard drive(s) or check that SCSI ID's
are correctly set. Run the ALUTIL by changing to the ALUTIL
subdirectory and entering "ALUTIL" at the DOS prompt.

4. Run "EISA Configuration" following the procedure supplied
by the manufacturer of your EISA computer or motherboard.
The EISA configuration procedure will ask for the file
!ALW3330.CFG contained on this diskette. Refer to the
EISA Configuration section of the AL-6X00 Installation
Guide for information on configuration options.

5. Once the system and adapter(s) are configured perform a DOS
"FORMAT" if necessary.


NOTE:

Some features of the ALUTIL were incomplete at the time of
shipment. Please contact ALWAYS Technical Support at (818)
597-1400 or check our BBS (818) 597-0275 for latest update
information.



PARTIAL CONTENTS OF THIS DISKETTE:

FILE DESCRIPTION
--------------------------------------------------------
README.TXT This file.

BETA.DIR Beta files soon to be released.
!!! CAUTION !!! Use these files
at your own risk. Although,
features have been added and
performance improved; unknown
side-effect may occur.

BIOS.BIN AL-6xxx Adapter BIOS firmware.

FLASH.DIR AL-6xxx embedded 186 firmware
and FLASH download directory.

!ALW3330.CFG AL-6xxx EISA Configuration file.

AL6ASPI.SYS AL-6xxx ASPI for DOS Driver.

NET3XX.DIR AL-6xxx ASPI for NOVELL 3.11
Directory. Refer to "read me"
text files in this directory for
more information.

CONFIG.SYS Sample CONFIG.SYS file. The
actions performed by this file
are necessary in order to use
the ASPI for DOS driver. If
there is an existing CONFIG.SYS
file, merger the contents of the
file on this disk with the your
existing CONFIG.SYS.

ALUTIL.DIR This is the Always Utility
directory, it contains the
utility program and associated
files. Run the utility by
changing to the ALUTIL directory
and entering "ALUTIL" at the DOS
prompt.

	Filename	Size	Readme	O.S.	Description
	1000e2d1.zip	732KB	1000e2d1.htm		Always AL-1000E2 utility diskette 1 of 2
	1000e2d2.zip	664KB	1000e2d2.htm		Always AL-1000E2 utility diskette 2 of 2
	1000ed1.zip	550KB	1000ed1.htm		Always AL-1000E utility diskette 1 of 2
	1000ed2.zip	670KB	1000ed2.htm		Always AL-1000E utility diskette 1 of 2
	1000utl1.zip	336KB	1000utl1.htm		Always AL-1000 utility diskette 1 of 2
	1000utl2.zip	308KB	1000utl2.htm		Always AL-1000 utility diskette 2 of 2
	2000net2.zip	703KB	2000net2.htm		Always IN-2000 Novell 2.x drivers
	2000u144.zip	179KB	2000u144.htm		Always IN-2000 utility diskette
	2400util.zip	703KB	2400util.htm		Always AL-2400 utility diskette
	6200util.zip	219KB	6200util.htm		Always AL-6200 utility diskette
	7000util.zip	180KB	7000util.htm		Always IN-2000 utility diskette
	alwayscd.zip	6KB	alwayscd.htm		These are the DOS and Windows 3.1x drivers for these Always Technology CD-ROM drives: Chinon CDS-431/ Sony CDU-541/ Texel DM-5020 & 5024/ Toshiba XM-3201B & 3301B/ Some Panasonic CDROMs