Drivers


README file for ATAPI CD-ROM device driver
===================================================================

I. Introduction
II. Requirements
III. Installation Procedures
IV. Changing Settings after Installation

I. Introduction
================
This CD-ROM package comes with an installation utility. This utility
installs the necessary CD-ROM software device driver needed by your
CD-ROM drive to interface with your PC system.

Files
-----
The drive installation diskette includes the following files:

README.TXT -- This user information text file
INSTALL.EXE -- CD-ROM installation program
AOATAPI.SYS -- CD-ROM device driver



II. Requirements
=================

Hardware Requirements
---------------------
1. IBM PC/AT or compatible (80386-base system or higher recommended)
2. Minimum VGA graphic display
3. Minimum 2M RAM recommended
4. one free IDE socket
5. one CD-ROM drive

Software Requirement
--------------------
1. Microsoft Windows 3.1 or later
2. MS-DOS version 6.0 or later
3. MS-DOS CD-Extension (MSCDEX 2.21) or later



III. Installation Procedures
============================

To install CD-ROM device driver, please follow the steps below:

1. Insert the installation diskette in your system's 3.5-inch floppy
disk drive.

2. Change the directory to that of your floppy disk drive, and type
the following at the DOS prompt:

INSTALL

3. Follow the screen instructions to complete the installation.

4. Reboot system to activate the driver.


In general, you can just continuously press the Enter key to install
the default settings. A directory (default C:\CDROM) containing the
CD-ROM driver will be created during installation. Your AUTOEXEC.BAT
and CONFIG.SYS files will also be modified to include the following
lines:

CONFIG.SYS :
[common]
DEVICE=C:\CDROM\AOATAPI.SYS /D:IDECD000
LASTDRIVE=N


AUTOEXEC.BAT :
C:\DOS\MSCDEX.EXE /D:IDECD000



IV. Changing Settings after Installation
=========================================

To reconfigure the settings of the CD-ROM driver, use a text editor,
such as EDIT.COM, to modify the previous two command lines in CONFIG.SYS
and AUTOEXEC.BAT and then restart your computer to activate it.


Changing the CONFIG.SYS file, and enabling DMA function
-------------------------------------------------------
DEVICE=\AOATAPI.SYS /D: [/BM] [/P:xxx,yy]

The is the name MSCDEX will use to find the device
driver. The maximum length of string is 8 characters.

Example:
DEVICE=C:\CDROM\AOATAPI.SYS /D:IDECD000 /BM /P:1F0,14

The option "/BM" enables DMA function if your mother board supports
this function.

********************************************************************
The option "/P:" specifies the I/O port address and IRQ level.
The number xxx in hex specifies the I/O port address (such as 1F0,
170, 1E8, or 168 in HEX), and yy specifies the IRQ level (such as
14, 15, 11, or 10 in decimal).
*** Please do not add /P option if you are not familiar ***
*** with I/O port address and IRQ level ***
********************************************************************


Changing the AUTOEXEC.BAT file
----------------------------
MSCDEX /D:driver [/E] [/K] [/S] [/V] [/L:letter] [/M:number]

Example:
C:\DOS\MSCDEX /D:IDECD001 /L:G /M:10

For more information, please refer to MS-DOS online help for MSCDEX
by typing HELP MSCDEX.

================================= END =============================

  Filename Size Readme O.S. Description
exe 610a211.exe 76KB 610a211.htm This is the ATAPI/DOS driver for these Acer (and Vuego) IDE Cd-Roms:610A / 612A / 616A / 616P / 620A / 624A / 645A / 655A / 665A / 685A.
exe acer525e.exe 43KB acer525e.htm This is the ATAPI/DOS driver for the Acer (and Vuego) 525E IDE Cd-Rom.
exe acer610a.exe 76KB acer610a.htm his is the ATAPI/DOS driver for these Acer (and Vuego) IDE Cd-Roms: 610A/612A/645A/655A/665A/685A.
exe acer625a.exe 44KB acer625a.htm This is the ATAPI/DOS driver for the Acer (and Vuego) 625A IDE Cd-Rom.
exe acer743e.exe 48KB acer743e.htm This is the ATAPI/DOS driver for the Acer (and Vuego) 743E IDE Cd-Rom.
exe acer747e.exe 45KB acer747e.htm This is the ATAPI/DOS driver for the Acer (and Vuego) 747E IDE Cd-Rom.
exe acer767e.exe 49KB acer767e.htm This is the ATAPI/DOS driver for the Acer (and Vuego) 767E IDE Cd-Rom.
exe acer787e.exe 1KB acer787e.htm This is the ATAPI/DOS driver for the Acer (and Vuego) 787E IDE Cd-Rom.
exe acer910e.exe 49KB acer910e.htm This is the ATAPI/DOS driver for the Acer (and Vuego) 910E/912E IDE Cd-Rom.
exe acer912e.exe 59KB acer912e.htm This is the ATAPI/DOS driver for the Acer (and Vuego) 912E IDE Cd-Rom.
exe acer916e.exe 59KB acer916e.htm This is the ATAPI/DOS driver for the Acer (and Vuego) 916E IDE Cd-Rom.
exe cdv212.exe 155KB cdv212.htm This is the ATAPI/DOS driver for these Acer (and Vuego) IDE Cd-Roms:624A / 632A / 6202A.

style="display:inline-block;width:336px;height:280px"
data-ad-client="ca-pub-5193782351433030"
data-ad-slot="2063583586">