*** Release Notes for HIT-DVD.SYS Ver.1.00 ***
1. General
HIT-DVD.SYS is the device driver for DOS CD-ROM Extensions that supports
ATAPI CD-ROM and DVD-ROM drives.
2. Command line switches of 'HIT-DVD.SYS'
(1) SYNTAX
DEVICE = [x:][\dir\]HIT-DVD.SYS /D:(device name) [/N:(number of drives)]
[/T:(drive type)] [/S:(base I/O address)] [/V]
(2) Meaning of switches
/D:(device name) Specifies "Device Name".
/N:(number of drives) Specifies number of drives to be supported by
this driver. Value 1 to 8 are valid.
If this switch is omitted, the driver will
search connected drives.
/T:(drive type) Specifies the first drive type to begin to
support.
Definition of drive types are as follows:
/T: base I/O address master/slave
---------------------------------------------
0 1F0h(primary port) master
1 1F0h(primary port) slave
2 170h(2nd port) master
3 170h(2nd port) slave
4 1E8h(3rd port) master
5 1E8h(3rd port) slave
6 168h(4th port) master
7 168h(4th port) slave
If this switch is omitted, it is the same as
/T:0.
/S:(base I/O address) Change IRQ number to the specified base I/O
address.
base I/O IRQ No.
address without /S: with /S:
(default) (alternate)
----------------------------------------------
170h 15 10
1E8h 12 11
168h 10 9
(1F0h) (14) (14)
/V Display installation information.
/B Use BIOS setting for data transfer.
3. Examples of installation
will reduce the loading time of the device driver.
DEVICE = HIT-DVD.SYS /D:MSCD001 /N:2 /T:2
-- Search beginning at /T:2 installing maximum 2 drives.
DEVICE = HIT-DVD.SYS /D:MSCD001
-- Install all drives connected to primary, 2nd, 3rd & 4th.
DEVICE = HIT-DVD.SYS /D:MSCD001 /N:2
-- Install maximum of 2 drives while auto searching.
DEVICE = HIT-DVD.SYS /D:MSCD001 /T:2
-- Search beginning at /T:2 (2nd port and master).
DEVICE = HIT-DVD.SYS /D:MSCD001 /S:170,168
-- Auto search all drives using alternate IRQ numbers
for 170 (IRQ 10) and for 168 (IRQ 9). Use default
IRQ numbers for others (1F0 IRQ 14; 1E8 IRQ 12).
DEVICE = HIT-DVD.SYS /D:MSCD001 /N:1 /T:2 /S:170
-- Install only 1 drive starting search at 2nd port master.
Use alternate IRQ of 10 for 170.
The above specifications are subject to change.
Oct. 1, 1997
Hitachi, Ltd.
Filename
Size
Readme
O.S.
Description
hitachi.zip
37KB
hitachi.htm
These are the OS/2 2.x drivers for these Hitachi CD-ROMs:
External: CDR1503S,CDR1700S,CDR1900S
Internal: CDR3500,CDR3600,CDR3700,CDR6700 Amdek Drives: LD-1, LD-2
Note: The .TXT files have excellent technical information on many of the older Hitachi CD-ROMs.
hitdvd.exe
49KB
hitdvd.htm
This is the ATAPI/DOS drivers for the Hitachi IDE DVD-ROM drives.
hitide_2.exe
49KB
hitide_2.htm
This is the ATAPI/DOS driver v1.06d2 for these Hitachi E-IDE CD-ROMs: CDR-7730 /7930/ 8130/ 8330/ 8335/ 8430.
hitide_3.zip
11KB
hitide_3.htm
This is the updated ATAPI/DOS driver v1.06d3 for these Hitachi E-IDE CD-ROMs:CDR-7730/7930/8130/8330/8335/8430.
hit_bus.zip
75KB
This is the DOS drivers (and MS Word documentation file) for these Hitachi
buscard CD-ROMs: CDR-1503s/ 1600s/ 1700s/ 1900s/ 3600s/ 3700/ 6700s.
style="display:inline-block;width:336px;height:280px"
data-ad-client="ca-pub-5193782351433030"
data-ad-slot="2063583586">