Drivers

//=============================================================================
//
// Copyright (c) 1994 Aztech Systems Ltd.
//
// Aztech CD-ROM Device Driver Version 1.01 for Windows NT 3.1 README FILE
//
//=============================================================================


I. Install Windows NT From an Aztech CD-ROM Drive With Native Controller
------------------------------------------------------------------------

1) Boot the Windows NT 3.1 Setup Disk for CD-ROM Installation.

2) Select 'C' for custom setup.

3) After SCSI adapter detection, select 'S' to add an adapter.

4) When prompted for manufacturer supplied disk, put in the
Aztech CD-ROM Driver diskette.

5) Select the 'Aztech CD-ROM Driver' choice.

6) Proceed with installation as detailed in Windows NT 3.1 System
Guide.



II. Install Aztech CD-ROM Drive to Existing Windows NT 3.1 System
-----------------------------------------------------------------

1) Boot up the Windows NT 3.1 system. Login as Administrator
(or an account with the same privileges as the Administrator)

2) Insert the Aztech CD-ROM Driver diskette into the floppy
drive A:.
Type A:SETUP to setup the CD-ROM Driver.

3) After SETUP is done, shut down and restart your system.



NOTE:
-----

1) Aztech CD-ROM 268 is not a SCSI device. However, it reserves
SCSI ID 3 in Windows NT 3.1 system. If you have other SCSI
devices, please do not use SCSI ID 3 for those SCSI devices.

2) The following CD-ROM port addresses (in hex) are supported in
this version of the driver:

300, 310, 320, 330, 340, 350, 630, 634, 650, 654, 670, 674,
690, 694.

3) If you are upgrading this version of the driver from a previous version
and the previous version is already loaded in your system, you
need to do the following:

a) Open "Control Panel".
b) Run "Devices" program by double clicking the "Devices" icon.
c) Select device "aztcd268", then click the "Startup..." button.
d) Check the "Disabled" button, and click "OK" button.
e) Select "Yes" to make changes.
f) Click "Close" button in "Devices" program.
g) Shutdown and reboot the system.
h) Follow the instruction in II.




  Filename Size Readme O.S. Description
zip atcd-nt.zip 126KB atcd-nt.htm This is the Windows NT 3.x driver for the Aztech CDA 268-01A IDE CD-ROM.
zip atcd-os2.zip 17KB atcd-os2.htm This is the OS/2 Warp 2.x driver for the Aztech CDA 268-01A IDE CD-ROM.
zip atcd268.zip 52KB atcd268.htm This is the DOS and Windows 3.1x Installation Drivers for the Aztech CDA 268-01A IDE CD-ROM.
zip atcd95-c.zip 20KB   This is the Windows 95 driver for the Aztech CDA 268-01A IDE CD-ROM if using the Sound Galaxy Nova16 (AZT-1605) sound card.
zip atcd95-i.zip 20KB   This is the Windows 95 driver for the Aztech CDA 268-01A IDE CD-ROM if using an Aztech Interface Card.
zip atcd95-w.zip 20KB   This is the Windows 95 driver for the Aztech CDA 268-01A IDE CD-ROM if using the AZT-2316/A sound card.
zip azt-ba31.zip 21KB azt-ba31.htm These are the DOS and Windows 3.1x drivers for the Aztech Business Audio.
zip azt-sg31.zip 30KB azt-sg31.htm These are the DOS and Windows 3.1x drivers for the Aztech Sound Galaxy sound card.
zip aztech95.zip 295KB aztech95.htm see readme for models
zip cda26803.zip 52KB cda26803.htm This is the DOS and Windows 3.1x Installation Drivers for the Aztech CDA 268-03I IDE CD-ROM.
Note: Even though the latter half of the README.TXT file is in German, the installer program is 100% English.
zip ide-nt.zip 113KB ide-nt.htm This is the ATAPI-Windows NT 3.x driver for all Aztech IDE CD-ROMs.
zip ide-os2.zip 13KB ide-os2.htm This is the ATAPI-OS-2 Warp 2.x driver for all Aztech IDE CD-ROMs.
zip ide268.zip 8KB   This is the ATAPI/DOS driver for the Aztech CDA 268-01A IDE CD-ROM. This may also work on the CDA 268-03I, but I'm not sure.
zip sgidecd.zip 52KB sgidecd.htm This is the ATAPI-DOS driver for all Aztech IDE CD-ROMs.

style="display:inline-block;width:336px;height:280px"
data-ad-client="ca-pub-5193782351433030"
data-ad-slot="2063583586">