DriverZone.com: The place to find device driver updates.

Xerox DocuPrint P8
XP Printer Driver Installation Instructions

Comments: Before loading the new driver uninstall any previous 
DocuPrint P8 Drivers.  Please read the instructions before 
downloading the driver.  

1. Turn on the DocuPrint P8 Printer with an IEEE1284 parallel 
   cable connected. If the "New Hardware Wizard" appears, 
   select "Cancel"

2. If you used a Xerox WorkCentre XE80 driver as an emulation 
   for Windows XP. Click Start ->All Programs -> Xerox 
   WorkCentre XE ->  and click on Printer Driver Uninstall 
   OR Click Start -> Control Panel -> Printers and other 
   hardware -> View installed printers and Faxes, 
   and delete the printer icon by right clicking the Xerox 
   WorkCentre XE80 icon, and left clicking delete.

3. On the Xerox Web Site, Select "P8XPE.exe" the XP English 
   printer driver.

4. Select "Save" at File Download.

5. Select "Desktop" at the "Save in:" dropdown box, then
   select "Save".

6. Select "Open", when the file download is complete.

7. Select "OK" at Important Install Information.

8. Select "OK" at WinZip Self-Extractor.

9. Close the Web site when finished.

10. Select "Start".

11. Select "Control Panel".

12. Select "Printers and other hardware".

13. Select "Add a Printer".

14. At the "Add Printer Wizard" select "Next".

15. Make sure the box "Automatically detect and install
    my Plug and Play Printers" is checked, select "Next".

16. The "Found New Hardware Wizard" will appear, under "What do 
    you want the wizard to do?" select "Install from a list
    or specific location(Advanced), then select "Next".

17. Select "Include this location in the search:" and type 
    "C:\P8XPE" in the text box below, and select "Next".

18. Select "Continue Anyway" at hardware installation.

19. Select "Finish" at completing the "Found New Hardware 
    Wizard" window.

20. At "Add Printer Wizard" window, select "Yes" for a 
    test page, and select "Next".

21. Select "Finish" at completing the "Add Printer 
    Wizard" window.

22. After test page is completed select "OK" to close the 
    next window.

23. At "Printers and Faxes" folder, make sure there is a 
    black check mark next to the Xerox WorkCentre icon.  
    If there is not, right click the Xerox DocuPrint P8 
    icon, and left click "Set as Default Printer".

***If printing to another port besides LPT1, you must change 
the port by right clicking the Xerox DocuPrint P8, left 
click on properties, click the ports tab, and select the 
correct port.