Filename: | crms_inf_windows_8.6.0.1008.zip | Signed on 2007.05.03 |
Description: | Intel Chipset Drivers for Windows (8.6.0.1008) | |
File Size: | 2096.7 kiB (2147038 bytes) | |
Hardware Category: | ||
Operating Systems: | Windows Vista (64bit), Windows XP (64bit), Windows Vista (32bit), Windows Server 2003 (32bit), Windows XP (32bit), Windows 2000 | |
Notes: | ************************************************************ * 1. OVERVIEW ************************************************************ The Intel(R) Chipset Device Software installs Windows* INF files to the target system. These files outline to the operating system how to configure the Intel(R) chipset components in order to ensure that the following features function properly: - Core PCI and ISAPNP Services - PCIe Support - IDE/ATA33/ATA66/ATA100 Storage Support - SATA Storage Support - USB Support - Identification of Intel(R) Chipset Components in the Device Manager This software can be installed in three modes: Interactive, Silent and Unattended Preload. Interactive Mode requires user input during installation; Silent Mode and Unattended Preload do not. This software also offers a set of command line flags, which provide additional installation choices. The command line flags are not case sensitive. Refer to Section 4 for detailed descriptions of these flags. Important Note: The Intel(R) Chipset Device Software is distributed in two formats: self extracting .EXE files (INFINST_AUTOL.EXE) or compressed .ZIP files (INFINST_AUTOL.ZIP). Depending on which distribution format is being executed, the commandline syntax may differ. Refer to Section 4 for more details. ************************************************************ * 2. SYSTEM REQUIREMENTS ************************************************************ 1. Please refer to the Release Notes to view the list of chipsets that the software included with this distribution package is designed to operate with. 2. One of the following operating systems must be fully installed and running on the system before installing this software: Microsoft Windows* Server 2003 Microsoft Windows Server 2003 x64 Edition* Microsoft Windows XP Professional x64 Edition* Microsoft Windows XP Microsoft Windows 2000 Microsoft Windows Vista Microsoft Windows Server 2008 Microsoft Windows Server 2008 x64 Edition This software is designed for the latest Service packs releases of above operating systems. To verify which operating system has been installed onto the target system, follow the steps below: a. Click on Start. b. Select Settings. c. Select Control Panel. d. Double-click on the System icon. e. Click on the General system properties tab. f. Verify which OS has been installed by reading the System information. 3. It is recommended that the software be installed on systems with at least 64MB of system memory when using Windows* 2000, Windows* XP, Windows Server* 2003, Windows* Vista, and Windows Server* 2008. 4. It is recommended that there be a minimum of 5MB of hard disk space on the system in order to install this software. 5. The operating system must be fully installed and running on the system before running this software. 6. Close any running applications to avoid installation problems. 7. It is recommended that the Intel(R) Chipset Device Software be installed onto the target system prior to the installation of other drivers. Please check with the system provider to determine which operating system and Intel(R) chipset are used in the system. ************************************************************ * 4. LIST OF AVAILABLE COMMAND LINE FLAG OPTIONS ************************************************************ The Intel(R) Chipset Device Software supports several command line flags for various installation options. Below is a list of all the available command line flags that may be used with the program call. Note that the '-L' and the '-S' flags MUST be specified at the end of the command line flag list. Flag Description ---- ----------- -? Displays the list of available command line flags. This flag works in Interactive Mode only. -A Extracts the INF files and Readme to either "C:\Program Files\Intel\InfInst" or the directory specified using the '-P' flag. The software will NOT install these INF files to the system. This flag can be combined only with the '-P' flag. All other options will be ignored if the '-A' flag is specified. This flag works in Interactive Mode only. -AONLY Extracts the needed INF files to install on the current system. If the install has been run once successfully, '-AONLY' will not return any INFs when used in conjunction with '-OVERALL' switch, all the needed INFs for the system will be extracted. -B Automatically reboots the system after installation. This flag is ignored if '-A' flag is specified. This flag works in either Silent Mode or Interactive Mode. -F2 Specifies an alternate location and name of the log file created by InstallShield Silent. This option is used for silent installation from a CD. 'Path' indicates the directory path where installation status is logged in file 'filename'. -L Specifies the language of the setup dialogs. This flag works in Interactive Mode only. -NOLIC Does not display the license agreement dialog box during installation. This parameter works in Interactive Mode only. -NOREAD Does not display the Readme display during installation. This flag works in Interactive Mode only. -NOWEL Does not display the welcome screen during installation. This flag works in Interactive Mode only. -OVERALL Updates ALL INF drivers on all available devices even if third party drivers are currently installed. This flag works in Interactive Mode only. -OVERIDE Updates the storage drivers even if a third party storage driver is currently installed. This flag works in Interactive Mode only. -OVERWRITE Ignores the overwrite warning dialog when installing an older version of the software. -P Specifies the hard disk location to which the INF program files are copied. If this flag is not specified at the command line, the directory is as follows: C:\Program Files\Intel\INFInst If this flag is used without the '-A' option, only the Readme will be copied to . The directory name can include spaces, but then a pair of double quotes (") must enclose the directory name. There should not be any space between the switch '-p' and the directory name. This flag works in either Silent Mode or Interactive Mode. -S Runs the Installer in Silent Mode (no user interface is displayed). This flag and the '-L' flag must be placed at the end of the command line flag list. Below are the language codes used with the '-L' flag: Language -------- ---------- 0401 Arabic (International) 0804 Chinese (Simplified) 0404 Chinese (Traditional) 0405 Czech 0406 Danish 0413 Dutch 0409 English (United States) 040B Finnish 040C French (International) 0407 German 0408 Greek 040D Hebrew 040E Hungarian 0410 Italian 0411 Japanese 0412 Korean 0414 Norwegian 0415 Polish 0416 Portuguese (Brazil) 0816 Portuguese (Standard) 0419 Russian 040A Spanish (International) 041D Swedish 041E Thai 041F Turkish ************************************************************ * 5. CONTENTS OF THE EXTRACTED FILES ************************************************************ INF files are copied to the hard disk after running the Intel(R) Chipset Device Software executable with an '-A' flag (i.e., "INFINST_AUTOL.EXE -A" or "SETUP.EXE -A"). The location of the INF files depends on whether a '-P' flag is specified along with the '-A' flag: 1. If a '-P' flag is not specified, then the INF files are copied to the following directory: "C:\Program Files\Intel\INFINST" 2. If a '-P' flag is specified, then the INF files are copied to the location listed immediately after the '-P' flag. Refer to Section 4 for more information on flag usage. After INF file extraction, the INF files and components are copied to the . These files and components are categorized according to the operating system. The following table summarizes the locations of the INF files by operating system: NOTE: "" is abbreviated "" in the remainder of this section. The directories are classified according to the following: All\ Contains INF files designed for Windows* 2000, Windows* XP, and Windows Server* 2003. Vista\ Contains INF files designed for Windows* Vista and Windows Server* 2008. NOTE: INFAnswr.TXT makes a CUSTOM.INF template that installs the INF files for Intel(R) chipsets during operating system setup. OEMs can incorporate this file into the Setup directory for the OEM Preload Kit. (Refer to Section 8 for more details.) ************************************************************ * 6. INSTALLING THE SOFTWARE IN INTERACTIVE MODE ************************************************************ 1. Verify that all system requirements have been met as described in Section 2 above. 2. Run the InstallShield* installation program: Self-extracting .EXE distribution: INFINST_AUTOL.EXE Compressed .ZIP distribution: SETUP.EXE 3. You will be prompted to agree to the license agreement. If you do not agree, the installation program will exit before extracting any files. 4. Once the operating system reboots, follow the on-screen instructions and accept default settings to complete the setup. ************************************************************ * 7. INSTALLING THE SOFTWARE IN SILENT MODE ************************************************************ 1. Verify that all system requirements have been met as described in section 2. 2. Run the InstallShield* installation program: For silent install with auto-reboot: Self-extracting .EXE distribution: INFINST_AUTOL.EXE -b -s Compressed .ZIP distribution: SETUP.EXE -b -s - or - For silent install without auto-reboot: Self-extracting .EXE distribution: INFINST_AUTOL.EXE -s Compressed .ZIP distribution: SETUP.EXE -s 3. The utility will perform the necessary updates and record the installation status in the following system registry key: HKEY_LOCAL_MACHINE\Software\Intel\INFInst 4. If the utility was invoked with the "-b" flag, the system will automatically reboot if the update was successful. NOTE: The system MUST be rebooted for all device updates to take effect. 5. To determine whether the install was successful, verify the "install" value in the registry key specified in Step 3. 6. In Silent Mode the utility will not display the license agreement. When using Silent Mode the license agreement, license.txt, will be placed in the following folder: Program Files/Intel/INFInst folder. Please read this agreement. The following describes the various parameters: Name: "install" Type: String Data: "success" The installation was successful. Data: "fail" The installation was not successful. No INF files were copied to the system. Name: "reboot" Type: String Data: "Yes" A reboot is required to complete the installation. Data: "No" No reboot is required to complete the installation. Name: "version" Type: String Data: Current version number of the Intel(R) Chipset Device Software ************************************************************ * 8. INSTALLING THE INF FILES PRIOR TO OS INSTALLATION ************************************************************ This procedure requires a minimum of 5MB of hard disk space. It is important to make sure there is enough disk space before beginning the copy process. Copy the operating system installation files from the setup directory to a directory on the hard disk. This can be done by opening 'My Computer', right-clicking on the correct drive, and selecting 'Properties'. The directories shall be referred to as follows: Windows* 2000 : Windows* XP : Windows Server* 2003 : ************************************************************ * 8A. INSTALLING THE WINDOWS* 2000 INF FILES PRIOR TO * OS INSTALLATION ************************************************************ NOTE: The Windows* 2000 OEM Preload Kit distribution CD contains a setup directory with all the base operating system setup files and installation programs (WINNT.EXE and WINNT32.EXE). The name of the directory may vary depending on the distribution CD (e.g., \I386\). 1. Create the following directory structure under the : \$OEM$\$$\INF 2. Copy the Windows* 2000 INF files from \XXXX\All to the directory created in Step 1 above: \$OEM$\$$\INF NOTE: XXXX is the directory name for the chipset of interest. Refer to Section 8 for more details. 3. Create the following directory structure under the : \$OEM$\$1\drivers\IntelINF 4. Copy the Windows* 2000 INF files and the catalog files (.CAT) from \XXXX\All to the directory created in Step 4 above: \$OEM$\$1\drivers\IntelINF NOTE: XXXX is the directory name for the chipset of interest. Refer to Section 8 for more details. 5. Either modify the default Windows* 2000 installation answer file, UNATTEND.TXT, located in , or create a customized answer file. The answer file must include the following information: [Unattended] OemPreinstall = Yes OemPnPDriversPath="drivers\IntelINF" A sample answer file for preloading the Intel(R) Chipset Device Software files is available at: \XXXX\All\INFAnswr.TXT For more information about Windows* 2000 answer files and unattended installations, please refer to the Microsoft* Windows* 2000 Guide to Unattended Setup. If you are a computer manufacturer, refer to the Microsoft Windows* 2000 OEM Preinstallation Kit (OPK) User Guide for more information about the \$OEM$ folder. Otherwise, refer to the Microsoft Windows* 2000 Deployment Guide. 6. Run "WINNT.EXE /u: /s:" to install Windows* 2000. ************************************************************ * 8B. INSTALLING THE WINDOWS* XP INF FILES PRIOR TO * OS INSTALLATION ************************************************************ NOTE: The Windows* XP OEM Preload Kit distribution CD contains a setup directory with all the base operating system setup files and installation programs (WINNT.EXE and WINNT32.EXE). The name of the directory may vary depending on the distribution CD (e.g., \I386\). 1. Create the following directory structure under the : \$OEM$\$$\INF 2. Copy the Windows* XP INF files from \XXXX\All to the directory created in Step 1 above: \$OEM$\$$\INF NOTE: XXXX is the directory name for the chipset of interest. Refer to Section 8 for more details. 3. Create the following directory structure under the : \$OEM$\$1\drivers\IntelINF 4. Copy the Windows* XP INF files AND the catalog files (.CAT) from \XXXX\All to the directory created in Step 4 above: \$OEM$\$1\drivers\IntelINF NOTE: XXXX is the directory name for the chipset of interest. Refer to Section 8 for more details. 5. Either modify the default Windows* XP installation answer file, UNATTEND.TXT, located in , or create a customized answer file. The answer file must include the following information: [Unattended] OemPreinstall = Yes OemPnPDriversPath="drivers\IntelINF" A sample answer file for preloading the Intel(R) Chipset Device Software files is available: \XXXX\All\INFAnswr.TXT If you are a computer manufacturer, refer to the Microsoft* Windows* XP Guide to Unattended Setup for more information about Windows* XP answer files and unattended installations. For more information about the \$OEM$ folder, refer to the Microsoft Windows* XP OEM Preinstallation Kit (OPK) User Guide. If you are not a manufacturer, refer to the Microsoft Windows* XP Deployment Guide. 6. Run "WINNT.EXE /u: /s:" to install Windows* XP. ************************************************************ * 8C. INSTALLING THE WINDOWS SERVER* 2003 INF FILES PRIOR * TO OS INSTALLATION ************************************************************ NOTE: The Windows Server* 2003 OEM Preload Kit distribution CD contains a setup directory with all the base operating system setup files and installation programs (WINNT.EXE and WINNT32.EXE). The name of the directory may vary depending on the distribution CD (e.g., \I386\). 1. Create the following directory structure under the : \$OEM$\$$\INF 2. Copy the Windows Server* 2003 INF files from \XXXX\All to the directory created in Step 1 above: \$OEM$\$$\INF NOTE: XXXX is the directory name for the chipset of interest. Refer to Section 8 for more details. 3. Create the following directory structure under the : \$OEM$\$1\drivers\IntelINF 4. Copy the Windows Server* 2003 INF files and the catalog files (.CAT) from \XXXX\All to the directory created in Step 3 above: \$OEM$\$1\drivers\IntelINF NOTE: XXXX is the directory name for the chipset of interest. Refer to Section 8 for more details. 5. Either modify the default Windows Server* 2003 installation answer file, UNATTEND.TXT, located in , or create a customized answer file. The answer file must include the following information: [Unattended] OemPreinstall = Yes OemPnPDriversPath="drivers\IntelINF" A sample answer file for preloading the Intel(R) Chipset Device Software files is available: \XXXX\All\INFAnswr.TXT For more information about Windows Server* 2003 answer files and unattended installations, please refer to the Microsoft Windows Server* 2003 Guide to Unattended Setup. If you are a computer manufacturer, refer to the Microsoft Windows Server* 2003 OEM Preinstallation Kit (OPK) User Guide for more information about the \$OEM$ folder. Otherwise, refer to the Microsoft Windows Server* 2003 Deployment Guide. 6. Run "WINNT.EXE /u: /s:" to install Windows* 2003. ************************************************************ * 9. INSTALLING THE INF FILES AFTER OS INSTALLATION ************************************************************ ************************************************************ * 9A. INSTALLING THE WINDOWS* 2000 INF FILES AFTER OS * INSTALLATION ************************************************************ Some Intel(R) chipset platforms already are supported by Windows* 2000, so it may not be necessary to use the INF files provided by this software to update Windows* 2000. The following steps describe the installation process of the Windows* 2000 INF files. You may need to repeat these steps to update all Intel(R) chipset devices not supported by Windows* 2000. 1. Copy the contents of the \XXXX\All directory to the root directory of the floppy disk (A:\). NOTE: XXXX is the directory name for the chipset of interest. Refer to Section 8 for more details. 2. Close all programs currently running on the system. 3. Click on Start. 4. Select Settings. 5. Select Control Panel. 6. Double-click on the System icon. 7. Click on the Hardware tab. 8. Click on the Device Manager button. 9. Select "Devices by connection" under the View menu. 10. Click on MPS Uniprocessor PC -OR- MPS Multiprocessor PC. NOTE: Only one of the above items will be displayed for a given system. 11. Click on PCI bus. 12. Right-click on the line containing the description PCI standard host CPU bridge -or- PCI standard ISA bridge -or- PCI standard PCI-to-PCI bridge -or- PCI System Management Bus -or- Standard Dual PCI IDE Controller -or- Standard Universal PCI to USB Host Controller (This line will be selected.) 13. Select Properties from the pull-down menu. 14. Click on the Driver tab. 15. Click on the Update Driver button. 16. Windows* 2000 will launch the Upgrade Device Driver Wizard. Select Next. 17. Ensure that the following choice is selected: Search for a suitable driver for my device (recommended) 18. Insert the floppy containing the Windows* 2000 INF files into the floppy drive. 19. Select Next. 20. Windows* 2000 will list locations from where the updated driver file can be found. Ensure that the following choice is selected: Floppy disk drives 21. Select Next. 22. Windows* 2000 should report that a driver has been found: (The detected device name will be displayed.) Select Next. 23. Select Finish. 24. Reboot the system when prompted to do so. ************************************************************ * 9B. INSTALLING THE WINDOWS* XP INF FILES AFTER OS * INSTALLATION ************************************************************ Some Intel(R) chipset platforms already are supported by Windows* XP so it may not be necessary to use the INF files provided by this software to update Windows* XP. The following steps describe the installation process of the Windows* XP INF files. You may need to repeat these steps to update all Intel(R) chipset devices not supported by Windows* XP. 1. Copy the contents of the \XXXX\All directory to the root directory of the floppy disk (A:\). NOTE: XXXX is the directory name for the chipset of interest. Refer to Section 8 for more details. 2. Close all programs currently running on the system. 3. Click on Start. 4. Select Settings. 5. Select the Control Panel. 6. Double-click on the System icon. 7. Click on the Hardware tab. 8. Click on the Device Manager button. 9. Select "Devices by connection" under the View menu. 10. Click on MPS Uniprocessor PC -OR- MPS Multiprocessor PC. NOTE: Only one of the above items will be displayed for a given system. 11. Click on PCI bus. 12. Right-click on the line containing the description PCI standard host CPU bridge -or- PCI standard ISA bridge -or- PCI standard PCI-to-PCI bridge -or- PCI System Management Bus -or- Standard Dual PCI IDE Controller -or- Standard Universal PCI to USB Host Controller (This line will be selected.) 13. Select Properties from the pull-down menu. 14. Click on the Driver tab. 15. Click on the Update Driver button. 16. Windows* XP will launch the Upgrade Device Driver Wizard. Select Next. 17. Ensure that the following choice is selected: Search for a suitable driver for my device (recommended) 18. Insert the floppy containing the Windows* XP INF files into the floppy drive. 19. Select Next. 20. Windows* XP will list locations from where the updated driver file can be found. Ensure that the following choice is selected: Floppy disk drives 21. Select Next. 22. Windows* XP should report that a driver has been found: (The detected device name will be displayed.) Select Next. 23. Select Finish. 24. Reboot the system when prompted to do so. ************************************************************ * 9C. INSTALLING THE WINDOWS SERVER* 2003 INF FILES AFTER * OS INSTALLATION ************************************************************ Some Intel(R) chipset platforms already are supported by Windows Server* 2003 so it may not be necessary to use the INF files provided by this software to update Windows Server* 2003. The following steps describe the installation process of the Windows* XP INF files. You may need to repeat these steps to update all Intel(R) chipset devices not supported by Windows Server* 2003. 1. Copy the contents of the \XXXX\All directory to the root directory of the floppy disk (A:\). NOTE: XXXX is the directory name for the chipset of interest. Refer to Section 8 for more details. 2. Close all programs currently running on the system. 3. Click on Start. 4. Select Settings. 5. Select the Control Panel. 6. Double-click on the System icon. 7. Click on the Hardware tab. 8. Click on the Device Manager button. 9. Select "Devices by connection" under the View menu. 10. Click on MPS Uniprocessor PC -OR- MPS Multiprocessor PC. NOTE: Only one of the above items will be displayed for a given system. 11. Click on PCI bus. 12. Right-click on the line containing the description PCI standard host CPU bridge -or- PCI standard ISA bridge -or- PCI standard PCI-to-PCI bridge -or- PCI System Management Bus -or- Standard Dual PCI IDE Controller -or- Standard Universal PCI to USB Host Controller (This line will be selected.) 13. Select Properties from the pull-down menu. 14. Click on the Driver tab. 15. Click on the Update Driver button. 16. Windows Server* 2003 will launch the Upgrade Device Driver Wizard. Select Next. 17. Ensure that the following choice is selected: Search for a suitable driver for my device (recommended) 18. Insert the floppy containing the Windows Server* 2003 INF files into the floppy drive. 19. Select Next. 20. Windows Server* 2003 will list locations from where the updated driver file can be found. Ensure that the following choice is selected: Floppy disk drives 21. Select Next. 22. Windows Server* 2003 should report that a driver has been found: (The detected device name will be displayed.) Select Next. 23. Select Finish. 24. Reboot the system when prompted to do so. |
style="display:inline-block;width:336px;height:280px"
data-ad-client="ca-pub-5193782351433030"
data-ad-slot="2063583586">